- Search Result
- Adjunct Faculty
- Scientific Officer
- Prospective Faculty
- Post-Doc Positions
- B.Tech Program in Civil Engineering
- B.Tech- M.Tech (Category A)
- Dual Degree (Category-B) Program in Civil Engineering
- Double Major in Civil Engineering
- M.Tech Info
- Environmental Engineering
- Geoinformatics
- Geotechnical Engineering
- Hydraulics and Water Resources Engineering
- Infrastructure Engineering And Management
- Structural Engineering
- Transportation Engineering
- MS (Research) Program in Civil Engineering
- PG Courses in Civil Engineering
- UG Courses in Civil Engineering
- Funding Opportunities
- PG Admissions
- Dual degree
- Research Groups
- Consultancy Projects
- Sponsored Projects
- Research Impact
- Recent Publications
M. Tech. Thesis
- Civil Department Telephone Directory
- e-Masters Program
- Departmental Forms
- Priority Areas
- Departmental Specializations
- B.Tech-M.Tech (Category A)
- B.Tech/ B.S. - M.Tech (Category B)
- Double Major
- MS by Research
- CE Time Table for 2023-24 for I semester
- CE Schedule of Courses for 2023-24 for I Semester
- Funding opportunities
- Post-Graduate Programe Admissions
- Undergraduate Programe Admissions
- Dual Degree Programme Admissions
- Research Activities
- Sponsored Research
- Professor of Practice
Civil Engineering
Indian Institute of Technology Kanpur
Year | Student | Supervisor | Title of Thesis |
---|---|---|---|
2022 | Adhikari, Dhiraj | Gupta, Tarun; Mishra, Sudib Kumar | DEVELOPMENT OF TECHNIQUE TO RECYCLE WASTE PLASTIC FROM PET BOTTLES INTO EPOXY PLASTIC COMPOSITES |
2022 | Lalwani, Paresh Nareshbhai | Tripathi, Sachchida Nand | Identification of Air Pollution Hotspots Using Low-cost Sensors in Lucknow |
2022 | Keshaw, Ashish Narain | Tare, Vinod | CONDITION ASSESSMENT OF PATNA DISTRICT THROUGH THE LENS OF SAMARTH GANGA PERSPECTIVE |
2022 | Prakash, Ravi | Tare, Vinod | Condition assessment of Lucknow district for developing framework for samarth Gomti |
2021 | Chaudhary, Akansha | Tare, Vinod | Assessment of Real Time Water Quality Data of Rivers and Drains Acquired Using Sensors in the Middle Segment of the Ganga Basin |
2021 | Singh, Vivek | Goel, Anubha | RETROFIT OF A RESIDENTIAL BUILDING IN COMPOSITE CLIMATE TO ACHIEVE ENERGY EFFICIENCY |
2021 | Singh, Ravi Pratap | Bose, Purnendu | Mathematical modelling of phosphate uptake and release by sodium polyacrylate containing rice straw biochar. |
2021 | Jose, Dilna | Gupta, Tarun | Black Carbon and Brown Carbon Emissions from Ships: Size Distribution and Optical Properties |
2021 | Srivastava, Prakhar | Singh, Abhas | Comparative Study of Inorganic and Organic Fertilisers on Plant Growth and Modelling of Certain Inorganic Contaminant Fate problems |
2021 | Singh, Saurabh Kumar | Goel, Anubha | Characterisation of emission from three indoor combustion sources and assessment of health risk from exposure to PM1 bound PAH |
2020 | Maddhesia, Jyoti | Sharma, Mukesh | National Emission Inventory of PM2.5 on GIS Platform |
2020 | Kabdal, Yogesh | Gupta, Tarun; Goel, Anubha | Evaluation of indoor environmental quality at locations frequented by students and office staff, and develop co-relation among the data of two instruments used for monitoring levels of particulate matter |
2020 | Sharma, Himanshu | Gupta, Tarun | Prediction of Hospital Visits At OPD of Respiratory Medicine Department Due To Air Pollutants Using Random Forest Regression |
2020 | Sachan, Nishant | Chaudhary, Abhishek | Assessment of biodiversity threats in India |
2020 | Vikram, Savit | Goel, Anubha | RETROFITTING STRATEGY FOR TRANSFORMING AN EXISTING RESIDENTIAL BUILDING INTO A NET-ZERO ENERGY BUILDING |
2020 | RAWAT, ANSHUL | Sharma, Mukesh; Goel, Anubha | Solar-based Sustainable Solution to Increase Production of Vegetables and to Handle Organic Solid Waste in Extreme Weather Conditions of High Altitude Area for Defence Forces |
2020 | Pratapaditya, Ghosh | Tripathi, Sachchida Nand | Understanding the non-local and local contributions during a high PM2.5 loading winter episode over the megacity of Delhi using WRF-Chem |
2020 | SINGH, GAJENDRA | Bose, Purnendu | Mathematical modelling of phosphate uptake and release on MgO-modified corncob biochar |
2019 | Kumar, Ashok | Tare, Vinod | Hydraulic and Water Quality Modeling for River Ganga between Haridwar and Varanasi |
2019 | PAHUJA, GAURAV | Singh, Abhas | PERFORMANCE EVALUATION OF A RUSTED-IRON NAIL BASED FILTER |
2019 | Shekhar, Aditya | Singh, Abhas | Development of methods in hexavalent chromium detection and remediation in groundwater |
2019 | Patel, Madhav | Tare, Vinod | Implications of Wide Spread Application of Leach Pit Toilets on Subsurface Waters |
2019 | Karmakar, Sourav | Tare, Vinod | Trends in Rainfall, Stream Flows and Water Storage in Yamuna River Basin |
2019 | Singh, Brihaspati Kumar | Sharma, Mukesh | PM2.5 and PM10 Source Apportionment Study: Deviation in CMB and PMF approaches. |
2019 | Naresh, Shubham | Tripathi, Sachchida Nand | Spatial and temporal variability in ionic and metal composition of PM2.5, across five sites of Gangetic plain; seasonality in secondary inorganic aerosol and preliminary source apportionment |
2019 | Saini, Prateek | Sharma, Mukesh | Cause and Age-specific Premature Mortality Attributable to PM 2.5 Exposure: An Analysis for Million-Plus Indian Cities |
2019 | Pandey, Jaivardhan | Bose, Purnendu | A Template on Net Zero Solid Waste for Cantonments of India |
2019 | TEJAWAT, RUCHIN | Goel, Anubha | Investigation of particle bound pollutants in Indoor Environment of rural household in Eastern U.P. from solid biomass burning as primary cooking fuel |
2019 | K V, Vinayaka | Bose, Purnendu | Template for net zero discharge of waste water from cantonment |
2019 | Bhowmik, Himadri Sekhar | Tripathi, Sachchida Nand | Inter and Intra seasonality in carbonaceous species (EC, OC) of PM2.5 aerosol over five sites of Indo-Gangetic plain, preliminary source apportionment and case study on multi-day regional SOA formation during winter at Faridabad. |
2018 | Ahmed, Saad | Tripathi, Sachchida Nand | Application of Microwave Radiometer in Nowcasting of Convective Activity |
2018 | Deshpande, Kalyani | Tare, Vinod | Flow and Water Quality Trends in Ganga River in the State of Uttar Pradesh |
2018 | Lokhande, Shweta | Tare, Vinod | Pattern of Flows and Water Quality in River Yamuna Over the Past Four Decades |
2018 | Badhan, Bhushan | Sharma, Mukesh | FRAMEWORK FOR ESTIMATING PAHs LOAD FROM URBAN WASTE WATERS |
2018 | Jha, Aditya Kumar | Gupta, Tarun | MEASUREMENT OF VOCs WITHIN AN ACADEMIC CAMPUS AND NEARBY SOILS |
2018 | Mundra, Radhika | Goel, Anubha | Examination of Characteristics of Particles Emitted from Incense Burning in an Experimental Chamber |
2018 | Ola, Deepshikha | Goel, Anubha | Assessment of Human Health Risk from Exposure to PPAHs in Different Indoor Microenvironments |
2018 | Garg, Divyam | Goel, Anubha | Examining Impact of Ventilation Conditions on Air Quality of Different Indoor Micro-Environments at IIT Kanpur |
2018 | Ekande, Onkar | Bose, Purnendu | Uptake of Phosphate from aqueous solution using MgO-modified corncob biochar |
2018 | Verma, Akshat | Singh, Abhas | A Study on the Precipitation Extent and Kinetics of Select Arsenic-containing Solids |
2018 | Kumar, Satyaveer | Bose, Purnendu | SIMULATION OF ARSENIC REMOVAL BY COLUMN OF RUSTING IRON NAILS |
2018 | Bhojwani, Vinod | Singh, Abhas | Development of a smartphone-based sensor for monitoring of chromium(VI) contamination and for chromium(VI) remediation using a two-bucket filter system |
2018 | Gupta, Aman | Gupta, Tarun | Airborne Microbial Load Inventory for Indoor and Outdoor Micro-environments within an Academic Institute |
2017 | Jhajhra, Ajeet Singh | Sharma, Mukesh | Air Quality Modeling using WRF-CMAQ and Estimation of Air Pollution Emission Control Cost |
2016 | Malviya, Abhay | Tare, Vinod | ASSESSMENT OF ASSMILITIVE CAPACITY IN TERMS OF BOD LOAD IN MOST POLLUTED REGION OF RIVER GANGA |
2016 | Chinmay | Sharma, Mukesh; Dikshit, Onkar | Atmospheric Modelling of Secondary Organic Aerosol using WRF-CHEM |
2016 | Gupta, Shubham | Sharma, Mukesh | GHG mitigation plan for Delhi city compliant to Paris Agreement 2015 |
2016 | Anjum, Md. Manzar Hussain | Gupta, Tarun | Quantitative Analysis of Seasonal Bioaerosol and its Correlation with Meteorological Parameters |
2016 | Verma, Ritika | Gupta, Tarun | Prevalence of Respiratory Allergies in relation to various surrounding parameters: A Cross Sectional Study on Health among Residents of IIT Kanpur and nearby |
2016 | Garg, Rahul | Sharma, Mukesh | Application of WRF-CHEM Modeling to Study Atmospheric VOCs (Toluene, Xylene and Isoprene) in Delhi |
2016 | Thomas, Jeenu | Bose, Purnendu | Calibration of Algal model and Algae-Bacterial model using Genetic Algorithm |
2016 | Guria, Robinson | Bose, Purnendu | Modelling Arsenic Sequestration by Rusting Iron |
2016 | Suryawanshi, Shalini | Gupta, Tarun | Source apportionment of indoor air pollutants in IIT Kanpur campus |
2016 | Kumar, Sumit | Bose, Purnendu | Surrogate modeling of Algal Growth Dynamics in Photo-Bioreactor using ANN |
2015 | Panwar, Deepak Kumar | Sharma, Mukesh | Impact of Local Meteorology on Performance of Air Quality Model in Flat and Complex Terrains: Application of AERMOD |
2015 | Nakka Venakta Satya, BharathKumar | Tripathi, Sachchida Nand | Source apportionment of submicron aerosols of Kanpur city in Indo-Gangetic plain |
2015 | Vohra, Karn | Tripathi, Sachchida Nand | A Chamber Study for Aerosol Behaviour |
2015 | Kumar, Abhay | Gupta, Tarun | Source Apportionment of Pm1 and Sensitivity Analysis of Its 20 Subsets |
2015 | Kachchhawa, Lokesh | Gupta, Tarun | Comparison of PM1 sources for day and night time at Kanpur using Positive Matrix Factorization (Receptor model) technique |
2015 | Khaitan, Harshit Khaitan | Singh, Abhas | Comparison of Different Sorbents for Fluoride Removal from Synthetic Groundwater |
2015 | Sharma, Mukesh; Russell, Armistead G | Gupta, Tarun | Atmospheric black carbon: national emission inventory, uncertainty analyses and WRF-Chem modelling in Ganga basin |
2014 | Bhole, Shrikant Anil | Singh, Abhas | Geochemical Identification of Dominant Forms of Chromium in Contaminated Soil, Groundwater and Chromium Ore Processing Residue near Kanpur |
2014 | Mishra, Alabhya Kumar | Tripathi, Sachchida Nand | A STUDY OF FORMATION OF CHARGED SPECIES IN THE ATMOSPHERES OF TITAN AND EARTH AND THEIR EFFECT ON ATMOSPHERIC CONDUCTIVITIES |
2014 | Ratn, Amuly | Bose, Purnendu | Calibration of Algal Growth Model Using Multi-Objective Genetic Algorithm |
Year | Student | Supervisor | Title of Thesis |
---|---|---|---|
2022 | Pokharkar, Omkar | Goel, Salil | Alert System for Rotorcrafts in UAS Traffic Management |
2022 | Nandy, Aritra | Lohani, Bharat | Power Line Extraction From LiDAR Point Clouds Using Deep Learning |
2022 | Kumar, Prince | Devaraju, Balaji | Towards a Module for Obtaining Absolute InSAR Atmospheric Phase Screen Maps in ISCE |
2022 | Dhote, Rohit Jagannath | Goel, Salil | Tree Stem Detection and Counting using Terrestrial Laser Scanning Data |
2022 | Paul, Debjit | Dikshit, Onkar | Deep Learning Framework for Cross Modal Retrieval in Remote Sensing Domain |
2022 | Yaduwanshi, Nishu | Lohani, Bharat | Use of LiDAR data, GIS, DSS for Water Conservation Sites |
2022 | Kanderi, Ashish | Lohani, Bharat | PointCNN for Segmentation of powerlines from 3-D LiDAR Point Cloud |
2021 | Gupta, Pooja | Lohani, Bharat | Deep Learning based Semantic Segmentation of 3D LiDAR Point Cloud using 2D Image Projection Technique |
2021 | Pratap, Jay | Goel, Salil | Extraction of Morphological Parameters of Trees Using LiDAR Data |
2021 | Chebolu, Dinesh | Devaraju, Balaji | Estimation of Soil Moisture Content using GNSS-IR |
2021 | Yadav, Anshul | Goel, Salil | Multi-POV Multimodal Object Detection Using RGB Images and LiDAR Data |
2021 | Anwar, Ibaad | Devaraju, Balaji | GNSS data processing using undifferenced code pseudoranges |
2020 | Gupta, Diksha | Dikshit, Onkar | Semi-supervised classification of hyperspectral images using Deep Convolutional generative adversarial network |
2020 | Srivastava, Saurabh | Dikshit, Onkar | Evaluation of imaging rover for surveying applications |
2020 | Rawat, Yadvendra Singh | Dikshit, Onkar; Nagarajan, B | Development of Regional Geoid Model of Kanpur Nagar |
2019 | M, ARJUN | B, Nagarajan | DEVELOPMENT OF LOCAL GEOID MODEL FOR KANPUR REGION USING GNSS/LEVELLING AND ITS APPLICATION IN RIVERINE FLOOD MODELLING |
2019 | Yadav, Deepanshu | Lohani, Bharat; Nagarajan, B | Determination of solar insolation over an area using point cloud obtained from terrestrial photographs |
2019 | Garg, Pulkit | Nagarajan, B; Dikshit, Onkar | Unsupervised Classification of Hyperspectral Imagery |
2019 | Belwalkar, Anirudh | Dikshit, Onkar | Spectral-spatial classification of hyperspectral remote sensing images using deep learning framework |
2018 | Gupta, Himanshu | Lohani, Bharat; Nagarajan, B | Development of a Mobile Based Application to Estimate Solar Potential of a Place Considering Surrounding Obstructions |
2018 | Arora, Aakash | Nagarajan, B | Real Time Decision System for Route Monitoring in Hilly Terrain to Aid in Counter Insurgency Operations |
2018 | Pande, Shivam | Dikshit, Onkar | Land use/land cover classification of fused Sentinel-1 and Sentinel-2 imageries using ensembles of Random Forests |
2018 | Muduli, Subhransu N. | Dikshit, Onkar | IONOSPHERIC MODELLING USING MULTI-FREQUENCY GNSS DATA |
2018 | Kumar, Ankit | Dikshit, Onkar | Machine learning based spectral-spatial classification of Hyperspectral images |
2018 | Nath, Avishek | Dikshit, Onkar | Deep learning based classification of hyperspectral images |
2018 | Agrawal, Tarun | Lohani, Bharat; Mishra, Subhas C | Land consolidation:rearrangement process using algorithm for agricultural land |
2018 | Saraswat, Shivam | Lohani, Bharat; Hamid, Faiz | Development of a UTM (UAV Traffic Management) system for India |
2018 | Abbasi, Salik | Hamid, Faiz; Lohani, Bharat | Development of UAV Traffic Management System using Mixed Integer Linear Programming |
2018 | Singh, Sarvesh Kumar | Bharat, Lohani; Pant, Pradeep Chandra; Nagarajan, Balasubramanian | A System for Accurate Estimation of Solar Insolation at a Point |
2017 | Pundir, Vandana | Nagarajan, B; Horwath, Martin; Scheinert, Mirko | Development of a quasigeoid model for the Gamburtsev Subglacial Mountains in Antarctica |
2017 | Choudhary, Devendra | Nagarajan, Balasubramanian; Lohani, Bharat | An approach for determining solar potential of a place using terrestrial images |
2017 | Kaplesh, Akshay | Dikshit, Onkar | FEATURE BASED LEARNING FOR FUSION OF REMOTE SENSING IMAGES |
2017 | Siddharth, Rahul Rao | Dikshit, Onkar; Nagarajan, B | Development of Local Geoid undulation Model of IIT Kanpur area |
2017 | Aggerwal, Amita | Dikshit, Onkar | Web based framework for Carrying capacity assessment of IIT Kanpur |
2016 | Mittal, Namit | Lohani, Bharat; Mishra, Rakesh Kumar | Simulating Airborne LiDAR Data Using Advanced Computing Techniques and Realistic Terrain Models: Limulator 3.0 |
2016 | Verma, Aaditya | Lohani, Bharat; Pasari, Sumanta | Analysis of Foot-Mounted Navigation System for Surveying |
2016 | Yadav, Sarvesh | Dikshit, Onkar; Nagarajan, B | Investigations on IRNSS data using standard point positioning approach |
2016 | Shah, Saurabh | Lohani, Bharat | A system for augmenting mobile images with additional information from a server |
2016 | Aggarwal, Ayush | Dikshit, Onkar | Spatial prediction for landslides using machine learning models |
2016 | Narendran, Anisha | Dikshit, Onkar | Evaluation of Mutual Information based Registration of Remotely Sensed images |
2016 | Subhadarsini, Suchismita | Lohani, Bharat; Tripathi, Shivam | Investigation of catchment identification algorithms for urban area using LiDAR data |
2016 | Sonam | Lohani, Bharat; Pandey, Gaurav | Comparative Study of Algorithms for Extracting pole-like objects using Mobile LiDAR Data |
2016 | Sharma, Sadbodh | Lohani, Bharat; Mukerjee, Amitabha | Monitoring Construction Progress Using UAV Acquired Images |
2016 | Agarwal, Shrey | Lohani, Bharat | Investigation of Spatio-temporal Interpolation Techniques |
2016 | Singh, Shilpa | Dikshit, Onkar | Snow cover estimation using Ensemble of snow indices and SVM classifier |
2016 | Harbola, Shubhi | Lohani, Bharat | A NOVEL APPROACH FOR ESTIMATING HORIZONTAL ACCURACY OF LiDAR DATA |
2016 | Hawadiya, Gaurav | Dikshit, Onkar | Ensemble classifiers for hyperspectral image classification |
2015 | Mishra, Abhay Kumar | Lohani, Bharat | AUGMENTED REALITY SYSTEM FOR DIMENSIONAL MEASUREMENT USING SMARTPHONE CAMERA |
2015 | Pradeep, Lakshmi | Dikshit, Onkar | Analysis of GNSS Data Combinations for Multi-frequency Environment |
2015 | Sheoran, Swagta Kumari | Lohani, Bharat | A system for generating 3D models of artifacts |
2015 | Kumar, Ritesh | Dikshit, Onkar | EVALUATION OF IMAGE SEGMENTATION TECHNIQUES |
2015 | Chauhan, Khushal Singh | Dikshit, Onkar | Web-GIS based Election Information System |
2015 | Gupta, Shikhar | Lohani, Bharat | Comparative Study and Improvement of Algorithms for Extracting Pole-like Objects Using Mobile LiDAR Data |
2015 | Jaiswal, Natrajan | Lohani, Bharat | Interpolation methods for spatiotemporal dataset |
2014 | Ashutosh | Dikshit, Onkar | DeformatioMonitoring of Coal Mines Using Geodetic Techniques a Case Study from South Karanpura, Jharkhand |
2014 | Ashapure, Akash | Dikshit, Onkar | Refinement of training data using genetic algorithm |
2014 | Kabra, Akshay | Dikshit, Onkar | Generation of Digital Elevation Model using Cartosat-1 Imagery |
2014 | Shukla, Piyush Kumar | Lohani, Bharat | Automatic Geolocation of Targets Tracked by Aerial Imaging Platforms using Satellite Imagery |
2014 | Singh, Anamika | Lohani, Bharat; Agarwal, Sanchit | Algorithm Development and Implementation for Quality Control of Airborne LiDAR Dataset |
2014 | Kumar, Saurabh | Lohani, Bharat | Formalization of route for Overweight Consignments |
2014 | Gupta, Arpana | Dikshit, Onkar; Misra, Sudhir | Web GIS Framework for Electric Utility Management of IIT Kanpur |
2014 | Gupta, Khushboo | Dikshit, Onkar; Misra, Sudhir | A Web GIS for IIT Kanpur Water Infrastructure |
2014 | Gupta, Surabhi | Lohani, Bharat | Augmented reality system using LiDAR point cloud data for displaying dimensional information of objects in mobile phones |
2014 | Panjabi, Vishesh | Lohani, Bharat | Obstacle Navigation System for Visually Impaired People Using Stereo Vision |
2014 | Gupta, Agrim | Lohani, Bharat | Chimneystack Geometry Measurements using laser scanning – A Simulation and Sensitivity Study |
2014 | Kumar, Himanshu | Lohani, Bharat | Automatic LiDAR data Registration Methods |
Year | Student | Supervisor | Title of Thesis |
---|---|---|---|
2022 | Kumar, Pardeep | Ghosh, Priyanka | NUMERICAL MODELING OF GEOCELL REINFORCED BALLASTED RAILWAY TRACK |
2022 | Prajapati, Vikas Matapher | Das, Arghya | Development of a User Material Subroutine for Unsaturated Soil Constitutive Models and FE Analysis |
2022 | Vardhan, Ankit Kumar | Patra, Nihar Ranjan | BEHAVIOUR OF VERTICAL PILES UNDER OBLIQUE PULL-OUT LOADING IN ORGANIC SOIL |
2022 | Verma, Swapil | Das, Arghya | Quantification of Physical Damage in Granular Rocks using Discrete Element Modelling |
2022 | M, Sinchith | Ghosh, Priyanka | SEISMIC SLOPE STABILITY ANALYSIS IN PURELY COHESIVE SOIL USING METHOD OF STRESS CHARACTERISTICS |
2021 | Singh, Nitish Kumar | Das, Arghya | Finite Element Modelling of Undrained Deformation in Soils. |
2020 | Suthar, Sachin | Patra, Nihar Ranjan | Parametric Study of Continuous Helical Displacement (CHD) Pile using Finite Element Analysis |
2020 | ALAM, SHUAIB | Das, Arghya | A STUDY ON PRESSURE SOLUTION OF CALCITE UNDER LOW CONFINING PRESSURE |
2020 | Manna, Debashis | Ghosh, Priyanka | Ultimate Bearing Capacity of Closely Placed Strip Foundations Resting on Reinforced Embankment |
2020 | Bisht, Mukesh Singh | Das, Arghya | A Study on Particle Shape Evolution in Crushable Granular Materials |
2020 | Nandi, Shibsankar | Ghosh, Priyanka | SEISMIC STABILITY ANALYSIS OF FINITE SLOPES USING SLIP LINE THEORY COUPLED WITH PSEUDO-STATIC APPROACH |
2019 | Anand, Abhishek | Sathiyamoorthy, Rajesh; Patra, Nihar Ranjan | PERFORMANCE OF UNSATURATED GEOSYNTHETIC CLAY LINERS UNDER VARIOUS GEOENVIRONMENTAL CONDITIONS |
2019 | Yadav, Akshay Shambhaji | Patra, Nihar Ranjan | Analysis of Non-homogeneous Slopes Reinforced with Single Pile and Line Pile Groups |
2019 | SINGH, SHAURYA | Raychowdhury, Prishati | PROBABILISTIC ANALYSIS OF LIQUEFACTION |
2019 | Kumar, Amit | Raychowdhury, Prishati | A Sensitivity Analysis of Ballasted Railway Track |
2019 | Kamal, Pulkit | Patra, Nihar Ranjan | Strength and Deformation Behaviour of Silty Soil Stabilized with Waste Leather Strips |
2019 | Chand, Bhupendra | Das, Arghya | Use of acoustic emission for constitutive parameter calibration in granular soils and rocks |
2019 | Kaswan, Mahendra | Patra, Nihar Ranjan | Strength and Deformation Behaviour of Expansive Clay Stabilized with Lime and Magnesium Chloride Solution |
2018 | Bindal, Ashwani | Das, Arghya; Das, Animesh | Effect of particle shape on the interlocking behavior of granular materials |
2018 | Darjee, Pankaj | Patra, Nihar Ranjan | FINITE ELEMENT ANALYSES OF GEOCELL AND GEOGRID SUPPORTED EMBANKMENTS |
2018 | Laddha, Shreya | Sathiyamoorthy, Rajesh | IMPACT OF CYCLIC WETTING AND DRYING ON SWELL SHRINK BEHAVIOR OF BENTONITE AMENDED FLY ASH HYDRULIC BARRIES |
2018 | Himanshu | Patra, Nihar Ranjan | Effect of Salt Solutions on the Swelling Potential and Permeability of Clay Soil |
2018 | Lal, Divyanshu Kumar | Das, Arghya | Development of Simplified Stress Integration Schemes for Soil Constitutive Models |
2018 | Lal, Divyanshu | Das, Arghya | Development of Simplified Stress Integration Schemes for Soil Constitutive Models |
2018 | Singh, Ankita | Ghosh, Priyanka; Patra, Nihar Ranjan | NUMERICAL ANALYSIS OF SEISMIC ACTIVE EARTH PRESSURE ON CANTILEVER RETAINING WALL WITH PRESSURE RELIEF SHELVES |
2018 | Kumar, Ankit | Das, Arghya | An Experimental and Numerical Assessment of Nano-porous Shale Rock Permeability |
2018 | Verma, Suraj Kumar | Das, Arghya | Behaviour of Carbonate sand (Aragonite) under monotonic and cyclic triaxial loading |
2018 | pandey, surya | Ghosh, Priyanka; Sathiyamoorthy, Rajesh | Seismic stability of embankment with micropile using pseudo dynamic approach |
2017 | Jain, Ayushi | Sathiyamoorthy, Rajesh | Performance of polymer amended bentonite based geosynthetic clay liners |
2017 | Maity, Shuvashis | Chandra, Sarvesh; Sathiyamoorthy, Rajesh | Numerical analysis of high embankments reinforced with micropiles over weak foundation soils |
2017 | Sasindran, Ajil | Sathiyamoorthy, Rajesh | Variability in the performance of bentonite amended fly ash hydraulic barriers in the presence of hexavalent chromium |
2017 | Khattri, Ashish | Raychowdhury, Prishati | A study on monitoring and prediction of landslide due to rainfall |
2017 | Vadigalla, Chinasivunnaidu | Patra, Nihar Ranjan | Finite element analysis of single pile subjected to oblique pullout loads under static compressive loads |
2017 | Bhushan, Ghanshyam | Das, Arghya | Effects of particle breakage on the fundamental properties of granular soils: An experimental study |
2017 | Prabu, C | Sathiyamoorthy, Rajesh | Stability of fly ash embankment under transient seepage conditions |
2017 | Anand, Abhishek | Raychowdhury, Prishati | Dynamic Characteristics of Isolated Square Footing |
2017 | Biswas, Nripojyoti | Ghosh, Priyanka | Interaction of Closely Spaced Strip Foundation on Multi-Layered Reinforced Soil Bed using Upper Bound Limit Analysis |
2017 | Samal, Suvra | Ghosh, Priyanka | Static Interaction Effect of Group of Helical Anchors Using Finite Element Analysis |
2017 | Kumar, M Rajeev | Ghosh, Priyanka | Finite element analysis of vibration screening technique using bamboos |
2017 | Vaishakh, T K | Das, Arghya | A Numerical Study on Permeability Variation in Porous Sandstones During Cataclastic Flow |
2017 | Singh, Rahul | Sathiyamoorthy, Rajesh; Das, Arghya | FINITE ELEMENT ANALYSIS OF SHEAR DEFORMATION IN STONE COLUMN |
2017 | Prakash, Swathy J | Patra, Nihar Ranjan | Ground Response Analysis of Soil from Khatima and Rudrapur Considering Improved Dashpot Model : A Comparative Study |
2016 | Saini, Parvinder Singh | Chandra, Sarvesh | Challenges and Developments in Tunnelling Technology- A Review |
2016 | Sisodiya, Mitul | Das, Arghya | Effects of Lode angle on shear localization in sand |
2016 | Raj, Jabez Selva | Sathiyamoorthy, Rajesh | STABILITY OF EMBANKMENT UNDER VARIOUS SEEPAGE CONDITIONS |
2016 | Verma, Swatantra | Patra, Nihar Ranjan | Ground Response Analysis of Faridabad Soil Considering Improved Dashpot Model |
2016 | M, ARSHADA MINNA | Sathiyamoorthy, Rajesh | SWELLING BEHAVIOUR OF UNSATURATED BENTONITE AMENDED FLY-ASH HYDRAULIC BARRIERS |
2016 | M, GOWTHAMAN | Patra, Nihar Ranjan | Static and Dynamic Behavior of Clay Soil Confined with Geocells |
2016 | Anusha, Dudekula | Patra, Nihar Ranjan | Analysis of Single Battered Pile in Sand Subjected to Oblique Pullout Loads |
2016 | Jyothi, V | Patra, Nihar Ranjan | Numerical Analysis of Negative Skin Friction in Group of Piles using Non-linear Consolidation Theory |
2016 | Jyothi, V | Patra, Nihar Ranjan | Numerical Analysis of Negative Skin Friction in Group of Piles using Non-linear Consolidation Theory |
2016 | Bajpai, P.K. | Das, Arghya | Estimation of Railway Ballast Degradation Using Hypo-plastic Approach |
2016 | Pandey, Priya | Chandra, Sarvesh; Raychowdhury, Prishati | A Parametric Study of Ballasted Railway Track under Static and Dynamic Loading |
2016 | Arya, Ankit | Raychowdhury, Prishati | A STUDY ON LANDSLIDE MEASUREMENT AND PREDICTION |
2016 | Dahiya, Akhilesh | Chandra, Sarvesh | Modified Mohr-Coulomb Criterion for Tunnels in Anisotropic Condition |
2016 | Mandhaniya, Pranjal | Chandra, Sarvesh | Finite Element Analysis of Static and Dynamic Loading on Ballastless Rail Track |
2016 | Kumar, Shashank | Sathiyamoorthy, Rajesh | A study on the behavior of geosynthetic encased columns under embankment loading |
2015 | S, Madhav | Sathiyamoorthy, Rajesh | Suction-water content relationship of compacted soil barriers |
2015 | Tripathi, Kundan | Sathiyamoorthy, Rajesh; Mishra, Sudib Kumar | Time Dependent Processes and Settlement Modeling in Municipal Solid Waste Landfills |
2015 | Pal, Alok | Ghosh, Priyanka | Bearing capacity of isolated and interacting skirted strip foundations using upper bound limit analysis |
2015 | SAI CHAND, J | Ghosh, Priyanka; Sathiyamoorthy, Rajesh | LINEAR AND NON-LINEAR ANALYSIS OF CLOSELY SPACED STRIP FOUNDATIONS USING PASTERNAK MODEL |
2015 | Yadav, Aniruddh Kumar | Sathiyamoorthy, Rajesh | Compressibility and Shear Strength Characteristics of Fresh Municipal Solid Waste from Panki Landfill |
2015 | Mohan, Chandra | RayChowdhury, Prishati | A STUDY ON SEISMIC BEHAVIOR OF IIT KANPUR SOIL |
2015 | Kumar, Ramdeo | Ghosh, Priyanka | STATIC AND SEISMIC INTERFERENCE OF SQUARE AND RECTANGULAR ANCHORS IN LAYERED SOIL |
2015 | Surapreddi, Sreyashrao Suryarao | Ghosh, Priyanka; Biswas, Krishanu | Pond ash fiber based geopolymers : processing and geotechnical property assessment |
2015 | Verma, Rupesh Kumar | Chandra, Sarvesh | Closed form solution for underground openings using polyaxial strength criterion |
2015 | Shukla, Devanshee | Chandra, Sarvesh | Effect of embankment height on settlement response of railway track |
2015 | Amanta, Adyasha Swayamsiddha | Patra, Nihar Ranjan | Influence of plastic fines on liquefaction resistance of panki pond ash |
2015 | Rahithya, S | Patra, Nihar Ranjan | Dynamic response analysis of Obra pond ash embankment |
2015 | Rahaman, Obaidur | Raychowdhury, Prishati | Various aspects of seismic active earth pressure on retaining walls using pseudo-dynamic method |
2015 | Priyadarshan | Raychowdhury, Prishati | Effect of abutment-backfill interaction on seismic behavior of skew bridges |
2015 | Naik, Anees | Sathiyamoorthy, Rajesh | Behaviour of compacted soil barriers under advective gas flow condition |
2015 | Nagavalleswari, Puram | Patra, Nihar Ranjan | Effect of arching on passive earth pressure for rigid retaining walls considering rotation at top |
2015 | Naveen Kumar, Yeruva | Patra, Nihar Ranjan | Buckling behavior of tapered piles under liquefied soil conditions |
2015 | Dubey, Vinay | Chandra, Sarvesh | Modelling of Multilayered Reinforced Railway Track under Moving Load at High Speed |
2015 | Babel, Kapil | Sathiyamoorthy, Rajesh | Reliability analysis of bioreactor landfill slope using moving least square response surface method |
2014 | Sharma, Siddhant | Raychowdhury, Prishati | Failure Mechanism of Self-supported Electric Poles: Experimental and Analytical Investigation |
2014 | Kumar, Vikash | Chandra, Sarvesh | Shear Strength Parameters of Panki Pond Ash at Low Confining Pressure |
2014 | Bhattacharya, Sobhan | Raychowdhury, Prishati | Effect of Fluctuation of Ground Water Table on Dynamic Response of Nuclear Reactors |
2014 | Anjali | Raychowdhury, Prishati | Ground Response Analysis of Ganga Sand Using Shake Table Tests |
2014 | Tiwari, Avneesh | Patra, Nihar Ranjan | Numerical Estimation of Negative Skin Friction on Single Pile Based on Non-linear Consolidation Theory |
2014 | Kumar, Abhishek | Patra, Nihar Ranjan | Behaviour Of IIT Kanpur Soil Confined With Geocells |
2014 | Das, Trupti | Patra, Nihar Ranjan | SOIL STABILISATION BY SCRAP TIRE RUBBER WASTE MATERIAL |
2014 | Sarangi, Piyush | Ghosh, Priyanka; Chandra, Sarvesh | Seismic Analysis of Nailed Vertical Excavation Using Pseudo-Dynamic Approach |
2014 | Mahendra | Sathiyamoorthy, Rajesh | SWCC of Compacted Soil Barrier- Its Estimation and Behavior using Filter Paper Method |
2014 | Singh, Ashish | Patra, Nihar Ranjan | Liquefaction resistance of soil-pond ash mixtures: effect of grading characteristics |
2014 | Kumar, Shivam | Chandra, Sarvesh | Analysis of Reinforced Railway Track under Moving Load at High Speed |
2014 | Gupta , Subham | Chandra, Sarvesh | MODELLING OF EXTENSIBLE GEOSYNTHETIC REINFORCED GRANULAR BED OVERLYING SOFT SOIL |
2014 | Majumder, Mainak | Ghosh, Priyanka; Sathiyamoorthy, Rajesh | Finite Element Analysis of Vibration Screening Technique Using GEOFOAM in Linear and Non-linear Elastic soil |
Year | Student | Supervisor | Title of Thesis |
---|---|---|---|
2022 | Sonker, Siddharth | Srivastava, Rajesh; Apurv, Tushar | Impact of Climate Change on Irrigation Water Requirement |
2022 | Paurwal, Rakshit | Tripathi, Shivam | Analysis of Fog Conditions in the Indo-Gangetic Plain Using a Novel Fog Index |
2022 | Yadav, Ashutosh Singh | Apurv, Tushar | Understanding the Physical Significance of Hydrologic Model Parameters through Calibration |
2020 | Kumar, Alok | Pahar, Gourabananda | A Unified Depth-Averaged Approach for Integrated Modeling of Surface and Subsurface Flow Systems |
2019 | Raghib, Faisal | Ojha, Richa | Spatio-Temporal Variability of Hydraulic Properties of Soils in an Agricultural Field |
2019 | Usmani, Shoeb | Jain, Ashu | Statistical Downscaling of Rainfall using Artificial Neural Network in Central India |
2019 | Kar, Arindam | Jain, Ashu | Estimation of Reservoir Sedimentation Using Remote Sensing Technique and Delft-3D Model |
2019 | Sharma, Rajeev | Srivastava, Rajesh | Assessment of Climate Change Impact on the Hydrology of the Kentucky River Basin Using the SWAT Model |
2019 | Tarun, Tiwari | Tripathi, Shivam | Regional flood estimation and determination of significant input variables using deep neural net and causal inference algorithms |
2019 | Agarwal, Ishank | Guha, Saumyen | A 2-D Coupled Steady State Model for Flow and Biogeochemical Reactions in the Hyporheic Zone |
2019 | This email address is being protected from spambots. You need JavaScript enabled to view it. '); //--> , Anshul | Jain, Ashu | Knowledge Extraction from Trained ANN Hydrologic Models in Three Contrasting Catchments |
2019 | Mishra, Shashank | Guha, Saumyen | A Non-Steady Non-Equilibrium Model for Isotope Enrichment during Evaporation coupled with Latent Heat Flux |
2019 | Shukla, Ravindra Nath | Srivastava, Rajesh | Analysis of Flow in Composite Channels |
2019 | Jaiswal, Shubhra | Ojha, Richa | Estimation of Effective Hydraulic Properties of Macropores in Soil using Near Surface Soil Moisture Observations |
2019 | YOGI, ABHISHEK | Srivastava, Rajesh | Constrained Optimization of Open channel cross sections using Metaheuristics Techniques |
2019 | Meena, Seeta Ram | Srivastava, Rajesh | Hydraulic Design of Rainwater Harvesting System for a Residential Campus |
2019 | Kumar, Aditya | Tripathi, Shivam | PARTITIONING OF EVAPOTRANSPIRATION USING HYDROMETRIC METHODS |
2019 | Singh, Pravesh | Tripathi, Shivam | Evapotranspiration Partitioning Using Stable Isotope Fractionation |
2018 | Kumar, Saurabh | Ojha, Richa | Numerical Investigation of Streamtube Approach to Model Flow in Heterogeneous Unsaturated Soils: A Plot Scale Study |
2018 | Rathi, Varun | Srivastava, Rajesh | Effect of Bed-Slope, Eddy loss and Non-uniform velocity on the discharge coefficient of a Sluice gate |
2018 | Gautam, Priyanka | Ojha, Richa | Analysing Trend And Periodicity in Atmospheric Lapse Rate across India |
2018 | Raghuvanshi, Praveen Singh | Srivastava, Rajesh | Impact of Climate Change on Groundwater Recharge |
2018 | A, Kirubhakarran | Srivastava, Rajesh | Evaluating the Impact of Climate Change on the Hydrology of the Punpun River Basin using the SWAT Model |
2018 | Saxena, Abhishek | Tripathi, Shivam | A Conceptual Water Balance Model for Small Rainfed Catchments |
2018 | Venkata Krishna Reddy, Duggireddy R | Tripathi, Shivam | Regional Flood Frequency Analysis for the Godavari Basin |
2017 | Chandramauli | Jain, Ashu; Schuetze, Niels | Simultaneous Optimization of Model Structure and Associated Model Parameters in Hydrological Modeling Using Mixed Integer Programming |
2017 | Narayanan, Revathi | Ojha, Richa | Estimation of Effective Hydraulic Properties of Soil Surface Macropores Using Remote Sensing Data and Vadose Zone Modeling |
2017 | Jain, Kartik | Effect of the Coriolis Force on Steady Groundwater Flow in Confined Aquifer | |
2016 | Das, Mainak | Bayesian estimation of Hurst exponent for noisy data | |
2016 | Tiwari, Alka | Mathematical Modeling of Bed-Load Transport: Revisiting van Rijn's Approach | |
2016 | Anand, Chitresh | Analysis of Spatio-temporal trends in Indian Precipitation | |
2016 | Tripathi, Shivam; Saha, Arun K | Numerical modelling of pressure flow deck scour under vertical contraction | |
2015 | Mondal, Sudhendra | Improvements for Peak flow Estimation and Extrapolation ability in ANN Rainfall-Runoff Modelling | |
2015 | Deshlahra, Suman | Simulation of a Heavy Precipitation Event at Kedarnath using WRF | |
2015 | C K, SRUTHI | NUMERICAL MODELLING OF SEDIMENT TRANSPORT IN RIVERS TO DETERMINE SAND REPLENISHMENT RATES: A CASE STUDY OF THE RED DEER RIVER | |
2015 | Manjhi, Ramo | Assessing Hydraulic Impacts of Flood Embankments by Numerical Modelling: A Case Study of River Ganga in Kanpur | |
2015 | Kumar, Shwet | Quantification of seepage from canals under steady state conditions | |
2015 | Goel, Nivesh | A Data Assimilation Approach for Imputing Missing Values in Soil Moisture Measurements | |
2015 | Karumanchi, Sri Harsha | A Study on Surface and Subsurface Water Interactions in the Ganga Basin and Design of an Automated Interactive Multi-Parameter Recorder and Water Sampler | |
2015 | Khamesra, Vedant | Estimation of Moisture Content in a Soil Column from Electric Potential Measurements | |
2015 | Apurv, Tushar | Rainfall-Runoff modelling using DENFIS and ELM | |
2014 | Gangwar, Mayank | Effect of Heterogeneous Bed Roughness on Open Channel Flow | |
2014 | Gupta, Alok | Detection of leakage in a pipeline using transient analysis | |
2014 | Kuniyal, Himani | Flood Modeling of the Bhagirathi and Alaknanda River Basins | |
2014 | Misuriya, Gaurav | Unsteady flow past broad crested weir | |
2014 | Adla, Soham | The Effect of Parthenium Hysterophorus Weed on Basin Hydrology | |
2014 | Rajendra, Sonaje Roshan | Numerical simulation of open channel flow due to levee break | |
2014 | Tamloorker, Aditya Dutta | Monte-Carlo simulation of two-dimensional contaminant transport through heterogeneous porous media using the finite element method | |
2014 | Vikram, Ajay | Two Stage Damage Assessment of Cable-Stayed Bridge using Neural Networks | |
2014 | Harish, M | Experimental Study of Unsteady Flow past Sharp Crested Weir | |
2014 | Mishra, Vishal | Rainfall-Runoff Modeling using Conceptual, ANN, and SVM models | |
2014 | Siddiqui, Mohd Salman | Comparison of Conceptual, ANN and ANFIS Models in Rainfall-Runoff Modeling | |
2014 | Mukhopadhyay, Sudarshana | Interpolation of Observed Rainfall data using Multivariate Copula | |
2014 | Sharma, Vikas | Comparison of Conceptual and ANN Comparison of Conceptual and ANN |
Year | Student | Supervisor | Title of Thesis |
---|---|---|---|
2022 | Thakur, Abhishek | Misra, Sudhir | FINANCIAL SUSTAINABILITY OF CONSTRUCTION AND DEMOLITION WASTE RECYCLING PLANTS |
2022 | Sonkar, Pravin Kumar | Misra, Sudhir | STRENGTHENING OF CONTRACTUAL PROVISIONS FOR CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT |
2022 | Chatterjee, Rupsagar | Mishra, Sudib Kumar | FLUTTER IN FUNCTIONALLY GRADED CONICAL SHELL UNDER FOLLOWER FORCE: SIMPLE ANALYSIS AND BEHAVIOR |
2022 | Naqvi, Arshil Abbas | Gupta, Vinay Kumar | Frequency-Domain Damage Estimation of SDOF Structures Subjected to Multiple Earthquake Events |
2021 | Singh, Rishank | Mukhopadhyay, Suparno; Kolay, Chinmoy | Damping Models for Simulating Energy Dissipation in Rigid Body-Rigid Base Rocking Systems |
2021 | Jaiswal, Sourabh | Mukhopadhyay, Suparno | Crack Detection In Plates Using Flexural Vibrational Data |
2021 | Gauriyar, Rahul | Mukhopadhyay, Suparno | A Modified Spherical Simplex Unscented Kalman Filter for Faster Identification of Large Dimensional Systems |
2021 | Karmakar, Sukanya | Kolay, Chinmoy | A Study on Seismic Behaviour and Design of Steel Braced Frame Buildings with Self-Centring Dampers |
2021 | Nissar, Malik Faisal | Kolay, Chinmoy | Seismic Response of Tall Buildings with a Single Viscously Damped Outrigger |
2021 | Patel, Ajaykumar Dahyalal | Rai, Durgesh C | Seismic Resistance of Truss Moment Frames with Aluminium and Steel Core Buckling Restrained Braces |
2021 | Waseem, Sikandar | Mukhopadhyay, Suparno | Predicting the Stability of Unanchored Rigid Bodies under Pulse-Type Ground Motions |
2021 | Ranjan, Rohit | Rai, Durgesh C | Behaviour of Masonry Structures with Stone Slab Roofing under Lateral Loads |
2021 | Loharkar, Karishma Sunil | Rai, Durgesh C | Seismic Fragility Analysis of Flat-Slab Viaducts |
2021 | Raj, Aditya | Kolay, Chinmoy; Mukhopadhyay, Suparno | Investigation and Mitigation of Damage in Suspension-Type Transmission Line Towers Due to Sudden Snapping of a Conductor |
2020 | Alam, Manjur | Mishra, Sudib Kumar | EFFECT OF HIGHER ORDER CURVATURES ON NONLINEAR VIBRATION OF NONLOCAL STRAIN GRADIENT BEAMS |
2020 | Rawat, Asutosh | Mukhopadhyay, Suparno | Homogenization of 2D and 3D Random Heterogeneous Media Using XFEM Modeling |
2020 | Daud, Mohammad | Mukhopadhyay, Suparno | Rocking of Deformable Bodies on Flexible Ground |
2020 | Dhanoriya, Abhilash | Mishra, Sudib Kumar | STABILITY ANALYSIS OF SHALLOW NANO ARCHES USING HIGHER ORDER NON-LOCAL STRAIN GRADIENT THEORY |
2020 | Pal, Subhankar | Mishra, Sudib Kumar | BAYESIAN MODEL UPDATING WITH A CONDITIONALLY HETEROSCEDASTIC ERROR DISTRIBUTION INCORPORATING DATA SENSITIVITY |
2020 | Panda, Jagajyoti | Chaudhuri, Samit Ray | ESTIMATION OF R FACTOR AND SEISMIC VULNERABILITY ASSESSMENT OF IS CODE DESIGNED RC FRAMES CONSIDERING SSI EFFECTS |
2020 | Bhardwaj, Madhur | Misra, Sudhir | Assessing Hazards Induced Vulnerability in Coastal Districts of Mainland India |
2020 | Navin, Nihal | Misra, Sudhir; Chaudhary, Abhishek | Energy and environmental assessment of a green building at IIT Kanpur |
2020 | Kumar, Abhay | Kolay, Chinmoy | Development and Characterisation of a Self-Centring Damping Device |
2019 | Kumar, Pushkar | Mishra, Sudib Kumar | Analysis of NiTinol Alloy Corrosion Behaviour in Simulated Concrete Pore Solution |
2019 | Sarath, J Prakash | Misra, Sudhir | Understanding impact of generation and handling of construction and demolition waste – A case study of an office building |
2019 | Prajapati, Vikas Krishna | Misra, Sudhir; Venkatanarayanan, Harish K | EFFECT OF GROUT MIX PROPORTIONS AND COARSE AGGREGATE GRADATION ON PROPERTIES OF PRE-PLACED AGGREGATE CONCRETE |
2019 | Kakoty, Hironmoy | Kolay, Chinmoy | Development of a Self-Centring Tension-Only Bracing System for Seismic Hazard Mitigation |
2019 | Shaj K S, Jineesh | K. Venkatanarayanan, Harish; Misra, Sudhir | Incorporating Risks in Planning for Improved Accuracy of Schedule and Cost Estimates in Projects |
2019 | Prasad, Aman | Harish, K Venkatanarayanan | SUITABILITY OF PROCESSED COW DUNG AS SAND REPLACEMENT IN MORTAR FOR LIGHTWEIGHT AND STRUCTURAL APPLICATION |
2019 | Sharma, Sahil | Chaudhuri, Samit Ray | Estimation of Earthquake-Induced Peak Pounding Force for Buildings Designed as per IS Codes: Development of a Simplified Approach. |
2019 | Kumar, Ajay | Venkatanarayanan, Harish K | Assessment of corrosion related durability properties for concrete containing limestone powder |
2019 | Dubey, Ashish | Venkatanarayanan, Harish K | Development of light weight thermally efficient mortars for construction using processed cow dung |
2019 | Anurag | Misra, Sudhir | Corrosion of steel in cement mortar in simulated marine environment |
2019 | Jain, Shaily | Mukhopadhyay, Suparno | MODAL IDENTIFICATION OF BRIDGES USING A SINGLE MOVING SENSOR |
2019 | Gautam, Ankur | Mukhopadhyay, Suparno | Damage Index Estimation From Measured Response For Nonlinear Systems Under Seismic Excitation |
2019 | Agrawal, Nikhil | Mukhopadhyay, Suparno | Effect of different types of modelling on the energy dissipation in rocking response |
2019 | Kalkal, Krutika | Misra, Sudhir; Vasudevan, Vinod | Determinants of Road Safety and Injury Severity in Bus Crashes: A Case Study from Mumbai, India |
2019 | Srivastava, Parul | Rai, Durgesh C | Seismic Fragility Analysis of C-bent Piers in Metro Viaducts |
2019 | Kumar, Suneel | Venkatanarayanan, Harish K | Influence of recycled brick powder on the hydration and pore structure of high-performance cement based systems |
2018 | Satya, Pranjal | Misra, Sudhir; Yadav, H R | Evaluating the design of pile groups for cantilever piers in elevated metro construction |
2018 | Roy, Ronit | Mishra, Sudib K | GEOMETRIC AND MATERIAL INSTABILITY PROBLEMS WITH DIFFERENTIAL QUADRATURE |
2018 | Kumar, Ankul | Rai, Durgesh C | Effect of Impact and Seismic Loads on Concrete Silo Structures |
2018 | Saifullah, Mohammad | Gupta, Vinay Kumar | Scaling of Ductility-Based Residual Displacements for Bilinear and Pinching oscillators |
2018 | Mangotra, Rajat | Chaudhuri, Samit Ray; Mukhopadhyay, Suparno | Online parameter estimation, damage detection and quantification with Unscented Kalman Filter using experimental data. |
2018 | Mishra, Pankaj | Misra, Sudhir | Studying the secondary factors influencing the chloride permeability of the concrete measured using RCPT |
2018 | Srivastava, Shivam | Misra, Sudhir | Studying the components of the Indian Construction Sector and Challenges of Construction Equipment Industry |
2018 | Kumar, Manoj | Venkatanarayanan, Harish K | PERFORMANCE OF SELF-COMPACTING CEMENT BASED MATERIALS FOR CERTAIN PRECAST AND REPAIR APPLICATIONS |
2018 | Kumar, Subodh | Rai, Durgesh C | STABILITY OF STEPPED AND LACED COLUMNS OF INDUSTRIAL STEEL STRUCTURES |
2018 | Avasthi, Rajat | Rai, Durgesh C | RESPONSE OF MASONRY WALLS AT CORNERS UNDER SHAKE TABLE GENERATED MOTIONS |
2018 | Mishra, Sarad | Venkatanarayan, Harish K | EVALUATION OF EFFECTS OF A STEPPED HEAT CURING REGIME ON THE PERFORMANCE OF PORTLAND POZZOLANA CEMENT BASED COMPOSITES |
2018 | Sharma, Akshay Deep | Harish, K Venkatanarayanan | UNDERSTANDING THE INFLUENCE OF REPROCESSED MORTAR FRACTIONS ON THE RHEOLOGY OF SELF-COMPACTING CEMENT MIXTURES |
2018 | Kumar, Punit | Mukhopadhyay, Suparno; Das, Sandip | Nonlinear Response Statistics of GMPE Compatible Ground Motions |
2018 | Ranka, Pallav | Mukhopadhyay, Suparno | Probability-of-Damage Based Optimal Decisions for Infrastructure Health Management |
2018 | Kala, Nilesh | Mukhopadhyay, Suparno | Damage Detection in Suspension Bridges Using Response Signal Energies |
2018 | Sharma, Chandan Kumar | Mukhopadhyay, Suparno | Physical Parameter Identification of Unrestrained Non-classically Damped Systems |
2018 | Bhatt, Ayushman | Misra, Sudhir; Vasudevan, Vinod | Comparative study of performance of Public Road Transport Corporations in India |
2018 | Verma, Abhishek | Venkatanarayanan, Harish K | UNDERSTANDING THE INFLUENCE OF BRICK POWDER ON THE RHEOLOGY OF SELF-COMPACTING CEMENT MIXTURES |
2018 | Chawla, Komal | Ray Chaudhuri, Samit; Kitey, Rajesh | Effect of surrounding fibre constraints on single fibre interface strength of glass-epoxy composite |
2018 | Avadh, Kumar | Misra, Sudhir; Pareek, Sanjay | Effect of coefficient of thermal expansion of reinforcing steel bars on steel-concrete interface in reinforced concrete under cyclic thermal loading |
2017 | Awasthi, Shashank | Misra, Sudhir | A study of Indian construction contract clauses to identify the relationship between Dispute Proneness and Unfair Risk Allocation |
2017 | Gupta, Ashish | Gupta, Vinay Kumar; Gupta, Ishwer D | A Comprehensive Seismic Hazard Mapping of National Capital Region using PSHA Approach |
2017 | Diwakar, Deepak Kumar | Venkatanarayanan, Harish K | Effect of heat on the hydration behavior of blended cement systems |
2017 | Vishwakarma, Om Prakash | Mukhopadhyay, Suparno | Experimental Study of Two Dimensional Rocking Motion Using Photogrammetry |
2017 | Bajpai, Utkarsh | Misra, Sudhir | Quality function deployment (QFD) based rating system for ready mix concrete plants |
2017 | Singh, Pushpendra Kumar | Misra, Sudhir | User oriented functional design of a hostel building using quality function deployment (QFD) |
2017 | Dubey, Shivam | Mukhopadhyay, Suparno; Chaudhuri, Samit Ray | Evaluation of masonry quality through prism and flat jack tests |
2017 | Vaishanav, Pragya | Rai, Durgesh C | On Structural Behaviour and Failure of RC Box Culverts due to Loss of Soil Support |
2017 | Singh, Devvrat | Misra, Sudhir | Studying work zones formed due to construction activities on existing four lane highways |
2017 | Tiwari, Dheeraj Kumar | Misra, Sudhir | Quantification of roughness of a concrete surface |
2017 | Baidya, Minangshu | Mishra, Sudib Kumar | Vibration Control of Piping System by Super Elastic Friction Damper |
2017 | Lyngdoh, Gideon Arthur | Mishra, Sudib Kumar | Structural Health Monitoring using A Bayesian Probabilistic Approach |
2017 | Dubey, Akshay | Misra, Sudhir; Venkatanarayanan, Harish K | A Study of Metal Steel Scraps usage as replacement of Fine Aggregates in High Strength Concrete |
2017 | Kashyap, Novnit | Misra, Sudhir | Ranking of Infrastructure in Smart Cities based on Utility Service in Indian contex |
2017 | Kumar, Niket | Misra, Sudhir; Tiwari, Naveen | Evaluation of Thermal Energy Performance of a Prefabricated Housing Unit |
2017 | Gaikar, Kshitij Suresh | Chakrabarti, Sekhar K | Capacity assessment of old masonry arch bridges in connection with doubling of railway tracks |
2017 | Kumar, Piyush | Ray Chaudhuri, Samit | Evaluation of Response reduction factor of RC frames considering SSI effects |
2017 | Chauhan, Mohit Singh | Mukhopadhyay, Suparno | Physical Parameter Estimation of Non-classically Damped Systems from Spatially Incomplete Modal Parameters |
2017 | Sheikh, Vaqas Hussain | Mukhopadhyay, Suparno | Effect of pulse type ground motions on response of rigid blocks on deformable media |
2017 | Mir, Faizan Ul Haq | Rai, Durgesh C | INFLUENCE OF BUILT-IN STAIRCASES ON THE SEISMIC RESPONSE OF REINFORCED CONCRETE BUILDINGS |
2016 | Samdaria, Nikhil | Gupta, Vinay Kumar | A New Approximation for Spectral Velocity Ordinates at Long Periods |
2016 | Bhaduri, Tathagata | Ray Chaudhuri, Samit | Performance Evaluation of Semi-Active Control Strategies Using Amplifying Brace |
2016 | Jana, Debasish | Ray Chaudhuri, Samit; Mukhopadhyay, Suparno | Optimal Actuator Location and Substructure Approach for Structural System Identification |
2016 | Singh, Amanpreet | Rai, Durgesh C | Dynamic Characterization and Seismic Assessment of Historic Masonry Structure of Rumi Darwaza |
2016 | Bansal, Nitin | Rai, Durgesh C | Behaviour of masonry walls at corners under lateral load |
2016 | Kurmi, Ankur Durga Prasad | Mishra, Sudib Kumar | ELASTIC BENDING ANALYSIS OF LAYERED QUASI-CRYSTAL PLATE |
2016 | Upadhya, Pankaj Kumar | Misra, Sudhir | Cold Weather Concreting: Strength and Durability with Admixtures |
2016 | Gupta, Aakash | Mishra, Sudib Kumar | DAMAGE DETECTION IN RAILWAY BRIDGES UNDER OPERATIONAL LOADING USING PHASE SPACE INTERROGATION – NUMERICAL AND EXPERIMENTAL INVESTIGATIONS |
2016 | Jaisal , A K | Gupta, Vinay Kumar; Gupta, Ishwer D | A COMPREHENSIVE SEISMIC HAZARD MAPPING OF NORTHWEST INDIAN STATES USING PSHA APPROACH |
2016 | Prakash, Om | Misra, Sudhir | VARIABLE PREMIUM MODEL FOR INSURANCE IN CONSTRUCTION INDUSTRY |
2016 | Devendra, Swami | Misra, Sudhir; Ozawa, Kazumasa | BEST VALUE BIDDING AS AN ALTERNATIVE TO LOWEST COST BIDDING FOR CONSTRUCTION PROJECTS |
2016 | Goyal, Shubham | Venkatnarayan, Harish | Development and Properties of high strength cementitious composite produced using steel scraps |
2016 | Saini, Pankaj | Venkatanarayanan, Harish K | EFFECT OF ADDITION OF CRUSHED SAND ON THE HYDRATION BEHAVIOUR OF PORTLAND POZZOLANA CEMENT |
2016 | Chauhan, Chetan | Misra, Sudhir; Kleiner, Brian; Mills, Thomas | Framework for Recording of Construction Accidents |
2016 | Koshta, Amit | Mishra, Sudib Kumar; Misra, Sudhir | Reliability Based Assessment of Imperfection Sensitive Shell Structures |
2016 | Kirar, Vikas | Misra, Sudhir | Handling Disruption in Existing Highway Traffic due to Construction Activities |
2016 | Harshman | Misra, Sudhir; Philip, Deepu | Integrating Payment Schedules with Progress to Ensure Timely Completion of Projects |
2016 | Abraham, Anu | Venkatanarayanan, Harish K | EVALUATION OF TEST METHODS FOR FLEXURAL BEHAVIOUR OF HIGH STRENGTH CEMENTITIOUS COMPOSITES USED IN PRECAST CONCRETE APPLICATIONS |
2016 | Agrawal, Chirag | Misra, Sudhir; Sinha, Sunil | Development of Consequence of Failure Index for Water and Wastewater Pipelines |
2016 | Shyamsunder, Loukham | Mishra, Sudib Kumar | Response Behavior and Optimization of a Torsionally Coupled building Isolated by Super-elastic Bearing |
2016 | Dixit, Shilpa | Ray Chaudhuri, Samit | Effect of Soil Structure Interaction on Safety Related Structures |
2016 | Raj, Alok | Rai, Durgesh C | Load Rating of Highway Bridges for Indian Codes |
2016 | Scaria, Alan | Gupta, Vinay Kumar; Gupta, Ishwer D | PROBABILISTIC SEISMIC HAZARD ANALYSIS OF PENINSULAR INDIA USING A HYBRID APPROACH |
2016 | Bhatt, Anita | Mishra, Sudib Kumar | behavior of elevated liquid storage tank under near fault earthquakes |
2015 | Gupta, Abhijit | Rai, Durgesh C | Behaviour and Design of Reinforced Concrete Frames with Beam Openings under Lateral Loads |
2015 | Nakhro, Khrielhuvi | Chakrabarti, Sekhar K | A Parametric Study on the Behavior of Steel Plate-Anchor Assembly Embedded in Concrete under Pure Torsion |
2015 | Bhattacharya, Madhurima | Venkatnarayanan, Harish; Misra, Sudhir | AN INTEGRATED APPROACH FOR UNDERSTANDING HYDRATION BEHAVIOR IN PORTLAND CEMENT SYSTEMS CONTAINING SILICA FUME |
2015 | Raj S, Bhushan | Rai, Durgesh C | ANALYTICAL OUT-OF-PLANE RESPONSE OF FABRIC REINFORCED CEMENTITIOUS MATRIX (FRCM) STRENGTHENED MASONRY INFILLED REINFORCED CONCRETE FRAMES WITH PRIOR IN-PLANE DAMAGE |
2015 | Saklani, Naman | Gupta, Vinay Kumar; Trifunac, Mihailo D | SCALING OF FOURIER SPECTRA OF STRONG EARTHQUAKE GROUND MOTIONS IN EASTERN AND WESTERN HIMALAYAS |
2015 | Gandhi, Girish Kumar | Misra, Sudhir | A Case Study in Durability of Concrete under Cyclic Freezing and Thawing |
2015 | M S, Adarsh | Chakrabarti, Sekhar K; Kar, Anil K | A Study on Flexural Behaviour of Beams Singly Reinforced with PSWC bar under Third Point Load |
2015 | Sagar, S Lalit | Rai, Durgesh C | Experimental Evaluation of Fabric Reinforced Cementitious Matrix for Seismic Strengthening of Masonry Infill Walls |
2015 | Tripathi, Anu | Rai, Durgesh C | SEISMIC VULNERABILITY ASSESSMENT OF STONE MASONRY MONASTIC TEMPLES IN SIKKIM HIMALAYAS |
2015 | Dwivedi, Suryakant | Mishra, Sudib Kumar | Experimental Evidence of Improved Performance of Superelastic Friction Base Isolator (S-FBI) |
2015 | Pable, Samruddhi Sumant | Mishra, Sudib Kumar | Phase Space Interrogation of Bridge under Vehicular Loading |
2015 | Krishna, Kunal | Chaudhuri, Samit Ray | Using Improvised Sacrificial Cladding for Damage Mitigation due to Air Blast: Numerical and Experimental Studies |
2015 | Amir, Mariyam | Chaudhuri, Samit Ray | Seismic Response Control of Braced Structures Using Magneto-Rheological (MR) Dampers |
2015 | Prasad, Reshma | Chaudhuri, Samit Ray; Bajpai, K K | Buckling of Composite Laminates under In-plane Boundary Conditions: Analytical and Experimental Studies |
2015 | Chopra, Sneha | Ray Chaudhuri, Samit | DAMAGE DETECTION AND LOCALIZATION IN A 3-D REINFORCED CONCRETE STRUCTURE: A PPLICATION OF VARIOUS DAMAGE DETECTION ALGORITHMS |
2015 | Tiwari, Ashwini | Misra, Sudhir; Venkitanarayanan, P | Tensile Strength of Concrete at High Loading Rate |
2015 | Dixit, Saurabh | Misra, Sudhir; Dikshit, Onkar | Framework for urban asset management – assessment and indexing of water related infrastructure |
2015 | Kumar, Vemuri V R P S | Chaudhuri, Samit Ray; Mohite, Preetam Kumar Marutrao | Modal properties of single-edge cracked RC column strengthened with FRP: analytical and numerical studies |
2015 | Garg, Sahil | Misra, Sudhir | Detection of air voids in ducts of prestressed concrete construction using non destructive testing |
2015 | Prasanna Kumar, Behera | Misra, Sudhir; Mondal, Kallol | A STUDY ON THE ONSET OF REBAR CORROSION INDUCED LONGITUDINAL CRACKS IN REINFORCED CONCRETE STRUCTURES |
2015 | Bhowmick, Sutanu | Mishra, Sudib Kumar | A NOVEL SUPERELASTIC FRICTION BEARING ISOLATOR (S-FBI) USING FERROUS SMA (FNCATB) FOR SEISMIC ISOLATION |
2015 | Paul, Bibhas | Mishra, Sudib Kumar | Seismic phase space interrogation of structures |
2015 | Agrawal, Anshita | Misra, Sudhir; Kleiner, Brian | Development of a framework for evaluation of safety performance of construction sites |
2015 | Bhargava, Sanjana | Mishra, Sudib Kumar | Phase space dissimilarity measures for structural health monitoring |
2014 | Sharma, Mohit | Rai, Durgesh C | Seismic Performance of Aluminium Core Buckling Restrained Braced Frame under Shake Table Generated Motions |
2014 | Sen, Novonil | Gupta, Vinay Kumar | On Estimation of Seismic Damage from Ductility and Hysteretic Energy Demands in Equivalent Oscillators Using Linear Response |
2014 | Mehta, Vikash Kumar | Chakrabarti, Sekhar K; Kar, Anil K | Analytical study of Nonlinear Bond-Slip relationship between PSWC-bar and Concrete under Standard Pull-out Test Condition |
2014 | Sharma, Abhinav | Mishra, Sudib Kumar | Experimental Investigations on Shape Memory Alloy-Pure Friction System for Base Isolation of Building |
2014 | Sachdeva, Gaurav | Chaudhuri, Samit Ray | Performance Evaluation of Flat Sliding Base Isolation System with Nonlinear Spring for Restoring Action |
2014 | Chhabra, Jaskanwal Preet Singh | Rai, Durgesh C | Experimental Evaluation of Aluminium Core Buckling Restrained Knee Braced Truss Moment Frame under Cyclic Loads |
2014 | Krishna, Saiwal | Chakrabarti, Sekhar K | An Experimental Study on the Behaviour of Embedded Steel Plate-Anchor Assembly in R.C. Structures under Cyclic Bi-axial Moments and Axial Load |
2014 | Naveen, Bejjam | Misra, Sudhir | Characterization of Mortar for Preplaced Aggregate Concrete |
2014 | Mishra, Kunal | Misra, Sudhir; Dikshit, Onkar | GIS Based Road Information System for IIT Kanpur |
2014 | Singh, Kunwar Siddharth | Misra, Sudhir; Philip, Deepu | Defining Milestones in Construction Projects Considering Completion Time, Precedence and Activity Cost |
2014 | Saini, Dikshant Singh | Ray Chaudhuri, Samit | Stress Concentration in Tubular to a Girder-Flange T-Joint Under Axial and In-Plane Bending Loads |
2014 | Chavva, Monica Sain | Mishra, Sudib Kumar | Seismic Performance Of Super-Elastic Buckling Restrained Braces |
2014 | Ghosh, Gourab | Ray Chaudhuri, Samit | EFFICIENCY OF MODE SHAPE-BASED METHOD IN STRUCTURAL DAMAGE LOCALIZATION |
2014 | Kalva, Meghana | Ray Chaudhuri, Samit | TUNED LIQUID COLUMN DAMPER (TLCD) FOR VIBRATION CONTROL IN BUILDINGS: NUMERICAL AND EXPERIMENTAL STUDIES |
2014 | Maitra, Rajarshi | Rai, Durgesh C | Validation of Design Methodology of Aluminium Shear Yielding Damper in Open Ground Story RC Frame using Full Scale Test |
Year | Student | Supervisor | Title of Thesis |
---|---|---|---|
2022 | Dugar, Ayush | Das, Animesh | Three Dimensional Reconstruction of Pavement Surface using Photometric Stereo Technique |
2022 | Jain, Abhishek | Das, Animesh; Das, Arghya | A numerical study on equivalent stiffness of porous media using fractured rock analogy |
2021 | Akhtar, SK Nasim | Chakroborty, Partha; Chakraborty, Pranamesh | Analysing influence of vehicle appearance characteristics on its detection performance. |
2021 | Chavan, Ashish Hanumant | Chakroborty, Partha | Performance evaluation of public transit routes in a data-starved environment |
2021 | Jangra, Keshav | Chakroborty, Partha; Mukhopadhyay, Suparno | Explorations into a possible decomposition of a driving cycle |
2021 | Bhargava, Shivom | Chakraborty, Pranamesh | Enhancing vehicle detection accuracy under low light conditions using infrared images |
2020 | Tiwari, Amarjeet | Das, Animesh | Design of pavement with non-uniform surfacing thickness for bituminous and concrete pavement with rehabilitation |
2020 | Meena, Jayant | Chakroborty, Partha | An ordered response model to determine the perceived level of service at toll plazas |
2019 | Gandhi, Avinash | Chakroborty, Partha; Deshmukh, Amol A | A Preliminary Analysis to Determine Level of Service at Toll Plazas |
2019 | Kumar, Amritesh | Vasudevan, Vinod; Rahman, Mohammad Arshad | A study of the bicycle lateral passing gap on streets under highly heterogeneous traffic conditions |
2019 | Tyagi, Vishal | Vasudevan, Vinod; Kumar, Vimal | A Study of the Overtaking Behaviour of Drivers Using the Principles of Game Theory |
2019 | Sharma, Parikshit | Chakroborty, Partha | Optimum design of parking lots with multiple vehicle types, parking fees and service classes |
2018 | Chaudhary, Abhishek | Chakroborty, Partha | Modelling Unidirectional Pedestrian Streams With Social Groups |
2018 | Rajurkar, Aniruddha | Nair, Syam | ROLE OF UV RADIATION IN LONG-TERM AGEING OF BITUMINOUS PAVEMENTS |
2017 | Godara, Ankit | Nair, Syam | An approach to reduce post stabilization expansion in fly ash - soil mixes |
2017 | Patel, Satyendra Kumar | Das, Animesh | Comparison between Winkler foundation and elastic solid foundation for concrete pavement analysis |
2017 | Gupta, Vaibhav | Nair, Syam | Effect of bitumen characteristics on pollutant interaction |
2017 | Sheel, Vaibhav | Nair, Syam | Predicting transient temperature response of pavements |
2017 | Janardhana Reddy, Kancham Reddy | Das, Animesh | Characterization of shape of aggregates using surface area and volume |
2017 | Bahari, Rajneesh | Nair, Syam | Comparative study on laboratory and field ageing of bitumen |
2016 | Muhammad, Haseeb | Nair, Syam | Recyclability of Reclaimed Asphalt Pavement Materials |
2016 | Tomar, Varun | Vasudevan, Vinod; Kumar, Vimal | A Diffusion Network based study on Adoption of a Transportation Policy |
2016 | Singh, Nishant | Vasudevan, Vinod | Multilevel Multinomial Logit Model based Exploratory Analysis of Mode Choice Decisions in Children’s Commute to School |
2016 | Mohanty, Alok | Nair, Syam | Evaluating the efficacy of construction demolition waste materials as base layers in pavements |
2016 | Deshpande, Ravichandra R | Das, Animesh | Volumetric and microscopic study of asphalt binder adsorption by aggregates |
2016 | Shukla, Mohit | Vasudevan, Vinod | Vehicle Tracking Using Point Cloud Clustering and State Estimation |
2016 | Choudhary, Ravi | Das, Animesh | Study on Skid Resistance of Asphalt Pavement Surface along Different Directions |
2015 | Sahu, Biswajit | Vasudevan, Vinod; Prakash, Puneet | Risk Analysis and Valuation of BOT Projects |
2015 | Gautam, Brijendra | Das, Animesh | Rehabilitation Strategy of Asphalt Pavement using Reliability Approach |
2015 | Yadav, Akhil | Chakroborty, Partha; Vasudevan, Vinod | Optimal Road Network Configuration with Service Related Constraints |
2015 | Chakraborty, Sayantan | Nair, Syam | Impact of moisture intrusion on durability of lime stabilized subgrades. |
2015 | Gehlot, Hemant | Chakroborty, Partha; Das, Animesh | Formulations to Obtain Optimum Batch Mixes with Reliability, Cost and Resource Considerations |
2015 | Mehta, Mayur | Vasudevan, Vinod | Understanding pedestrian temporal gap acceptance at unsignalized intersections |
2015 | Patel, Tanuj | Vasudevan, Vinod | Effect of Speed Humps on Bicyclists |
2015 | Katariya, Vishal | Das, Animesh | Thermal Stress in Concrete Pavement with Partial Separation from Underlying Layer for Day-Time Conditions |
2014 | Koyande, Aniket | Chakroborty, Partha; Pinjari, Abdul Rawoof | Modelling user's route choice behaviour in a unimodal public transit network |
2014 | Rehan, Syed Abu | Das, Animesh | Experimental study on estimation of angle of repose aggregates from a single source and its effect on strength of bituminous mix |
2014 | Chakraborty, Pranamesh | Chakroborty, Partha | Estimation of Annual Average Daily Traffic (AADT) for Indain Highways |
2014 | Goenka, Nitish | Vasudevan, Vinod; Garvin, Michael J | Pathways to Project Delivery Success and Failure in Road PPPs |
2014 | M N, Sharath | Das, Animesh; Paul, Debajyoti | Experimental Studies on Aggregate Durability |
2014 | Kumar, Tatavarthi Hemant | Das, Animesh; Ghatak, Animangsu | Study on Bond Strength Between Aggregates with Sandwiched Discontinuous Bitumen Film |
2014 | Bapna, Aman | Vasudevan, Vinod | Reliability Study on an Indian Road using Entropy |
2014 | Goyal, Parva | Chakroborty, Partha | A Linear Integer Programming Formulation for the Optimum Rake Assignment Problem |
2014 | Lunani, Keshav Lunani | Vasudevan, Vinod; Kumar, Vimal | Willingness to Pay for Improvement in Service Quality of Public Transit System |
DSpace JSPUI
Dspace preserves and enables easy and open access to all types of digital content including text, images, moving images, mpegs and data sets.
- Shodhbhagirathi @ IITR
- EARTHQUAKE ENGINEERING
MASTERS' THESES (Earthquake Engg) Collection home page
Issue Date | Author(s) | Research Supervisor/ Guide | Type | |
---|---|---|---|---|
Jun-2013 | - | |||
May-2018 | - | |||
May-2018 | - | |||
May-2018 | - | |||
May-2017 | - | |||
May-2018 | - | |||
May-2018 | - | |||
May-2018 | - | |||
Jun-2018 | - | |||
May-2018 | - | |||
May-2018 | - | |||
May-2018 | - | |||
May-2016 | - | |||
May-2016 | - | |||
May-2016 | - | |||
May-2016 | - | |||
May-2016 | - | |||
May-2016 | - | |||
May-2016 | - | |||
May-2016 | - |
- 2 Dinkar, Aditya Kumar
- 2 Kumar, Anil
- 2 Kumar, Mukesh
- 2 Kumar, Rajesh
- 2 Prakash, Nagrale Prajit
- 1 A. M., Raja
- 1 A., Ramesh Kumar
- 1 Adhikary, Shrabony
- 1 Adugna, Solomon
- 1 Agarwal, Akanksha
- 476 EARTHQUAKE ENGINEERING
- 16 SEISMIC ANALYSIS
- 13 SEISMIC RESPONSE
- 11 EARTHQUAKE
- 10 BUILDINGS
- 10 EARTHQUAKE RESISTANT DESIGN
- 9 LIQUEFACTION POTENTIAL
- 8 GRAVITY DAMS
- 8 LIQUEFACTION
- 107 2010 - 2018
- 162 2000 - 2009
- 120 1990 - 1999
- 79 1980 - 1989
- 32 1970 - 1979
- 1 1968 - 1969
- 64 Thakkar, S. K.
- 60 Paul, D. K.
- 51 Pandey, A. D.
- 31 Lavania, B. V. K.
- 29 Singh, Yogendra
- 28 Dubey, R. N.
- 28 Mukherjee, S.
- 24 Agarwal, Pankaj
- 24 Chandrasekaran, A. R.
- 21 Arya, A. S.
- HoD's Corner
- Former HoD's
- Achievements
- Latest News
- Notice Board
- July-Dec 2020
- Jan-Jun 2021
- July-Dec 2021
- Academic Calendar
- Prospective Students
- Environmental Engineering
- Geomatics Engineering
- Geotechnical Engineering
- Hydraulic Engineering
- Structural Engineering
- Transportation Engineering
- Dissertations
- Journal Publications
- Research Projects
- Patents/ Copyright
- INSPIRE Faculty & Post-Doc Fellow
- Technical / Scientific Officer
- Office Staff
- Advisory Council
- Video Gallery
- Structural engineering is the science and art of planning, design, construction, operation, monitoring and inspection, maintenance, rehabilitation and prevention, demolishing and dismantling of structures taking into consideration technical, economic, environmental, aesthetic and social aspects. This Group is the largest amongst the six Groups of the Department and has a faculty strength of 13 and a research student strength of 100 which consists of about 50 PG students and an equal number of Ph.D. students. Experimental facilities consist of the following 9 well-equipped laboratories:
- Material Test Laboratory
- Casting Laboratory
- Chemical Analysis Laboratory
- Heavy Test Laboratory -1
- Heavy Test Laboratory -2
- Impact Laboratory
- Fire Test Laboratory
- Durability Laboratory
- The Experimental Stress Analysis Laboratory.
- Incubation Centre for Construction Technology in Buildings and Roads.
- Technology Innovation Center for 3D Printing of Concrete.
Machine Learning Models for Computational Structural Mechanics
The numerical simulation of physical systems plays a key role in different fields of science and engineering. The popularity of numerical methods stems from their ability to simulate complex physical phenomena for which analytical solutions are only possible for limited combinations of geometry, boundary, and initial conditions. Despite their flexibility, the computational demand of classical numerical methods quickly escalates as the size and complexity of the model increase. To address this limitation, and motivated by the unprecedented success of Deep Learning (DL) in computer vision, researchers started exploring the possibility of developing computationally efficient DL-based algorithms to simulate the response of complex systems. To date, DL techniques have been shown to be effective in simulating certain physical systems. However, their practical application faces an important common constraint: trained DL models are limited to a predefined set of configurations. Any change to the system configuration (e.g., changes to the domain size or boundary conditions) entails updating the underlying architecture and retraining the model. It follows that existing DL-based simulation approaches lack the flexibility offered by classical numerical methods. An important constraint that severely hinders the widespread application of these approaches to the simulation of physical systems.
In an effort to address this limitation, this dissertation explores DL models capable of combining the conceptual flexibility typical of a numerical approach for structural analysis, the finite element method, with the remarkable computational efficiency of trained neural networks. Specifically, this dissertation introduces the novel concept of “Finite Element Network Analysis” (FENA), a physics-informed, DL-based computational framework for the simulation of physical systems. FENA leverages the unique transfer knowledge property of bidirectional recurrent neural networks to provide a uniquely powerful and flexible computing platform. In FENA, each class of physical systems (for example, structural elements such as beams and plates) is represented by a set of surrogate DL-based models. All classes of surrogate models are pre-trained and available in a library, analogous to the finite element method, alleviating the need for repeated retraining. Another remarkable characteristic of FENA is the ability to simulate assemblies built by combining pre-trained networks that serve as surrogate models of different components of physical systems, a functionality that is key to modeling multicomponent physical systems. The ability to assemble pre-trained network models, dubbed network concatenation , places FENA in a new category of DL-based computational platforms because, unlike existing DL-based techniques, FENA does not require ad hoc training for problem-specific conditions.
While FENA is highly general in nature, this work focuses primarily on the development of linear and nonlinear static simulation capabilities of a variety of fundamental structural elements as a benchmark to demonstrate FENA's capabilities. Specifically, FENA is applied to linear elastic rods, slender beams, and thin plates. Then, the concept of concatenation is utilized to simulate multicomponent structures composed of beams and plate assemblies (stiffened panels). The capacity of FENA to model nonlinear systems is also shown by further applying it to nonlinear problems consisting in the simulation of geometrically nonlinear elastic beams and plastic deformation of aluminum beams, an extension that became possible thanks to the flexibility of FENA and the intrinsic nonlinearity of neural networks. The application of FENA to time-transient simulations is also presented, providing the foundation for linear time-transient simulations of homogeneous and inhomogeneous systems. Specifically, the concepts of Super Finite Network Element (SFNE) and network concatenation in time are introduced. The proposed concepts enable training SFNEs based on data available in a limited time frame and then using the trained SFNEs to simulate the system evolution beyond the initial time window characteristic of the training dataset. To showcase the effectiveness and versatility of the introduced concepts, they are applied to the transient simulation of homogeneous rods and inhomogeneous beams. In each case, the framework is validated by direct comparison against the solutions available from analytical methods or traditional finite element analysis. Results indicate that FENA can provide highly accurate solutions, with relative errors below 2 % for the cases presented in this work and a clear computational advantage over traditional numerical solution methods.
The consistency of the performance across diverse problem settings substantiates the adaptability and versatility of FENA. It is expected that, although the framework is illustrated and numerically validated only for selected classes of structures, the framework could potentially be extended to a broad spectrum of structural and multiphysics applications relevant to computational science.
CAREER: Multi-Physics Transient Holography: A Non-Intrusive Imaging Approach for the Identification of Structural Damage in Mechanical Systems
Directorate for Engineering
Degree Type
- Doctor of Philosophy
- Mechanical Engineering
Campus location
- West Lafayette
Advisor/Supervisor/Committee Chair
Additional committee member 2, additional committee member 3, additional committee member 4, usage metrics.
- Solid mechanics
- Deep learning
- Structural engineering
- Numerical analysis
M Tech Thesis
- Institute of Technical Education and Research
Abstract and Figures
Discover the world's research
- 25+ million members
- 160+ million publication pages
- 2.3+ billion citations
- Semih Dokurer
- Daniel Minoli
- Taieb Znati
- Stefanos A. Nikolidakis
- Dimitrios D. Vergados
- Jeffrey Undercoffer
- John Pinkston
- Recruit researchers
- Join for free
- Login Email Tip: Most researchers use their institutional email address as their ResearchGate login Password Forgot password? Keep me logged in Log in or Continue with Google Welcome back! Please log in. Email · Hint Tip: Most researchers use their institutional email address as their ResearchGate login Password Forgot password? Keep me logged in Log in or Continue with Google No account? Sign up
- Departments
About the University
- At A Glance
- Director's Welcome
- Mission, Vision & Values
- Campus Safety
University Leadership
- Office of the President
- Administrative Offices
- Visiting Campus
- Maps and Directions
- Connect with Us
- Administration
Once students come to NITT, they stay!
Our 90% retention rate beats the national average of 65%, and 20% of our undergraduates go on to receive a graduate degree here.
Departments / Centres
- Architecture
- Chemical Engineering
- Civil Engineering
- Computer Applications
- Computer Science & Engineering
- Electrical & Electronics Engineering
- Electronics & Communication Engineering
- Instrumentation & control Engineering
- Management Studies
- Mathematics
- Mechanical Engineering
- Metallurgical & Materials Engineering
- Production Engineering
Centers/Common Facility
- Central Workshop
- Computer Support Group
- Estate Maintenance
- Guest House
- Lecture Hall Complex/Orion
- First Year Coordinator Office
- Sophisticated Instrumentation Facility
- CoE in Manufacturing
- Sports Center
- Training and Placement
National Institute of Technology, Tiruchirappalli
- Academic Programmes
- M. Tech.(Transportation Engineering and Management)
- Admission Procedure
- PEOs and POs
- Contact Details
- M.Tech. (Environmental Engineering)
- M. Tech.(Construction Technology and Management)
- M.Tech. (Geotechnical Engineering)
M.Tech. (Structural Engineering)
Structural engineering.
Structural Engineering is a core specialization in Civil Engineering. There is a growing demand for specialists in Structural Engineering. The aim of this course is to fulfill this need. Practicing engineers will find the course very useful and interesting. It will enable them to update their knowledge in the field of structural behavior and design. The curriculum has been so designed as to give exposure to the students on areas of structural analysis, design, detailing and construction. The course also includes the use of general purpose application oriented computer software in the field of Structural Engineering using finite element analysis and optimization techniques. The students have ample scope for placement in construction industries and educational institutions.
- Rules and Regulations
- Scholarships
- B.Tech . / B.Arch.
- M.Tech . / M.Arch.
- M.Sc . / MA
- MS (By Research)
Student Life
- Clubs & Associations
- Facilities & Services
- Hostel & Messes
- Office of the Dean (Students)
Other Links
- Tenders and Notices
- Job Opportunities
- National Institute of Technology Tiruchirappalli - 620015 Tamil Nadu, INDIA Fax: +91-431-2500133
© WebTeam NIT Trichy , National Institute of Technology, Tiruchirappalli
Join TheConstructor to ask questions, answer questions, write articles, and connect with other people. When you join you get additional benefits.
Confirm Password *
First Name *
Last Name *
Country Select a country… Åland Islands Afghanistan Albania Algeria Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belau Belgium Belize Benin Bermuda Bhutan Bolivia Bonaire, Saint Eustatius and Saba Bosnia and Herzegovina Botswana Bouvet Island Brazil British Indian Ocean Territory British Virgin Islands Brunei Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo (Brazzaville) Congo (Kinshasa) Cook Islands Costa Rica Croatia Cuba CuraÇao Cyprus Czech Republic Denmark Djibouti Dominica Dominican Republic Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guatemala Guernsey Guinea Guinea-Bissau Guyana Haiti Heard Island and McDonald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran Iraq Isle of Man Israel Italy Ivory Coast Jamaica Japan Jersey Jordan Kazakhstan Kenya Kiribati Kuwait Kyrgyzstan Laos Latvia Lebanon Lesotho Liberia Libya Liechtenstein Lithuania Luxembourg Macao S.A.R., China Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia Moldova Monaco Mongolia Montenegro Montserrat Morocco Mozambique Myanmar Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island North Korea Norway Oman Pakistan Palestinian Territory Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Poland Portugal Qatar Republic of Ireland Reunion Romania Russia Rwanda São Tomé and Príncipe Saint Barthélemy Saint Helena Saint Kitts and Nevis Saint Lucia Saint Martin (Dutch part) Saint Martin (French part) Saint Pierre and Miquelon Saint Vincent and the Grenadines San Marino Saudi Arabia Senegal Serbia Seychelles Sierra Leone Singapore Slovakia Slovenia Solomon Islands Somalia South Africa South Georgia/Sandwich Islands South Korea South Sudan Spain Sri Lanka Sudan Suriname Svalbard and Jan Mayen Swaziland Sweden Switzerland Syria Taiwan Tajikistan Tanzania Thailand Timor-Leste Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United Kingdom (UK) United States (US) Uruguay Uzbekistan Vanuatu Vatican Venezuela Vietnam Wallis and Futuna Western Sahara Western Samoa Yemen Zambia Zimbabwe
By registering, you agree to the Terms of Service and Privacy Policy . *
Log in to TheConstructor to ask questions, answer people’s questions, write articles & connect with other people. When you join you get additional benefits.
Join for free or log in to continue reading...
Username or email *
Forgot Password
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Sorry, you do not have permission to ask a question, You must log in to ask a question. Join now!
The Constructor
40 seminar/project topics in structural engineering.
Do you need to remove the ads? Join now!
🕑 Reading time: 1 minute
The specification of final year project's topics may have some influence on the future job or career of students. It, therefore, becomes very crucial to select an apt topic since students are going to do great and extensive research about it, it is possible that such a topic may open doors to different horizons in the field.
In this article, forty topics about structural engineering are presented which can be used for both seminars and graduation projects. There are lots of topic out there, but these are selected from literature and efforts made to specify most novel topics.
These topics deal with various aspects of structures such as improving certain aspects of design, repair damaged structures, study properties of structures under various modes of loading including static and dynamic like seismic forces. These project topics may need numerical modelling, experimental works, or combination thereof.
- Pushover analysis – cyclic loading, deterioration effect in RC Moment Frames in pushover analysis
- Rehabilitation – Evaluation of drift distribution
- Analysis of large dynamic structure in environment industry
- Theoretical study on High frequency fatigue behavior of concrete
- Seismic analysis of interlocking blocks in walls
- Estimation of marine salts behavior around the bridge structures
- A comparative study on durability of concrete tunnels undertaken in AP irrigation projects
- Prefabricated multistory structure, exposure to engineering seismicity
- Shape optimization of Reinforced underground tunnels
- Properties of Fiber Cement Boards for building partitions
- Behavior of RC Structures subjected to blasting
- The use of green materials in the construction of buildings
- Finite element model for double composite beam
- A new composite element for FRP Reinforced Concrete Slab
- Effect of shear lag on anchor bolt tension in a base plate
- Elastic plastic bending, load carrying capacity of steel members
- FE Analysis of lateral buckling of a plate curved in nature
- Green energy and indoor technologies for smart buildings
- Building environmental assessment methodology
- Numerical study on strengthening of composite bridges
- Strengthening effect for RC member under negative bending
- Effect of negative Poisson’s ratio on bending of RC member
- Macroeconomic cause within the life cycle of bridges
- Long term deflections of long-span bridges
- Structural damage detection in plates using wavelet theories (transforms)
- Hybrid Simulations: Theory and Applications
- Engineered Wood in Cold Climate
- Mechanical Properties and Engineering Application of Modern Timber
- Hybrid Structural Systems and Innovation Design Method
- Design of Reinforced Concrete Block Masonry Basement
- Nonlinear Analysis of a New 3D Skip-Floor Staggered Shear Wall Structure
- Advances in Civil Infrastructure Engineering
- Mechanical Performance of an Irregular Kiewitt Dome Structure
- Shear Distribution Coefficient Study under Horizontal Force
- Structural Damage Identification Method and Program Designing Based on Statistical Analysis
- Prescriptive or Performance Design for Fire?
- Deflection Control by Design
- New Code Provisions for Long Term Deflection Calculations
- Retrofitting and Repairing with composite materials
- Epoxy Coated Reinforcement and Crack Control
Madeh Izat Hamakareem
Related posts.
How to Estimate Duration of Activities in Construction
Risks in Public-Private Partnership (PPP) Projects
XiLiR Technologies, New Delhi, INDIA
CALL US NOW
+91-9810326343
- Embedded System (4 Weeks / 6 Weeks)
- Embedded Systems with PIC (4 Weeks / 6 Weeks)
- Embedded Systems with 8051 (4 Weeks / 6 Weeks)
- MATLAB Training (6 Weeks)
- Quadcopter | Drones
- GPS | GSM Projects
- IOT-Internet of Things
- MATLAB Image Processing
- RF | Bluetooth | Zigbee | WiFi
- Robotics | Mechatronics
- Robotics Mechatronics
- Smart Card & Biometric Fingerprint
- VLSI Design
- Solar Based Projects
- Power system
- Android Projects -Hardware
- Android Projects-Software
- Embedded-Systems
- Wireless Sensor Network
- MATLAB – Image Processing
- All-Type-Mechanical
- Automobile-Engineering
- Robotics | Mechatronics Projects
- Solar Energy Based Projects
- Core Mechanical
- Hydraulics-Based
- Pneumatics Piston | Air Engine
- Projects using Bi-Cycle
- Embedded System Projects
- Health Monitoring Projects
- Internet of Things
- Building-projects
- Smart City Projects
- Digital VLSI Design
- Matlab Image Processing
- Embedded Systems
- Power Electronics
- WSN/ Security/ Wireless Communication
- DSP/DIP/MACHINE LEARNING
- Digital Signal Processing (DSP)
- Communications based Projects
- Artificial Intelligence projects
- Cloud Computing Projects
- Computer Network / Information Security / WSN / MANET / VANET
- Python based Projects
- Java Based Project
- Data Mining Projects
- Labview Based Projects
- Matlab Simulink based Projects
- EEE Power System
- Thermal Engineering Projects
- CAD CAM Design
- Automobiles Engineering
- Machine Design
- Tool Engineering
- Structural Engineering
- Construction Management
- Transportation Engineering
- Environmental Engineering
- TOP 50 Mechanical Engineering Projects
- Raspberry Pi Based Projects
- Smart Card RFID | NFC
- GSM | GPS Based Projects
- Quadcopters | Drones | Hoverbikes
- Internet of things IOT
- Customized DRONES Development
- Competency Demonstration Report (CDR)
- MTech Project Thesis Writing Services in Faridabad, Haryana, India
- M.Tech Projects Thesis Writing Help Guidance
- M.Tech Engineering Thesis Research Dissertation
- B.Tech Projects Maker Guidance Help
- B.Tech Project Developer Experts Ghaziabad
- Engineering Thesis Research Project for M.Tech
- B.Tech Mechanical Engineering Projects List
- B.Tech Projects Online Guidance Help Noida
- Mechanical Engineering Projects
- Mtech Projects Thesis Writing Services
- Latest B.Tech Electronics and Communication Engineering Projects
- Fashion projects
- Terms and Conditions
- Latest Arduino Software Download
- Proteus Professional v8.9 SP0 Download
- MATLAB R2016a
M.Tech Structural Engineering Projects
M.Tech, B.Tech Structural Engineering Project List
Structural Analysis and Design of a Multistory structure | Download | ||
Effect of Wind on RC structure resting on sloping ground and Analysis done using Etabs software. | Download | ||
Analysis and Design of Footbridge | Download | ||
Analysis and Design of Skewbridge | Download | ||
Design of Bridge cum barrage | Download | ||
Analysis and Design of Auditorium using staadpro | Download | ||
PERFORMANCE-BASED SEISMIC DESIGN OF RC FRAME BUILDING | Download | ||
Analysis and Design of Assembly Building | Download | ||
Analysis of G+30 Highrise buildings by using Etabs for various frame sections in ZoneIV and ZoneV | Download | ||
Dynamic analysis of Residential Building in Zone2 and zone5 | Download | ||
Analysis and design of G+6 Building in different seismic zones of India | Download | ||
Retrofitting of reinforced concrete frames using steel bracings | Download | ||
Structural analysis of a multi-storeyed building for different plan configurations | Download | ||
Analysis and design of multi storied building | Download | ||
Comparison of analysis and design of regular and irregular configuration of multi story building in various seismic zones and various types of soils | Download | ||
Design of circular water tank | Download | ||
Design of residential apartment building | Download | ||
Structural design of concrete structure | Download | ||
Analysis and design of multistory building with grid slab | Download | ||
Effect of wind load on tall buildings in different terrain category | Download | ||
Earth quack analysis of multi storied residential building-a case study | Download |
Procedure at XiLiR Technologies
We make Proper Synopsis on the Selected Topic with new work and technique to be implemented.
2. Topic Approval From your College Mentor/Guide Your college mentor /Guide is the person who accepts the topic then we proceed further.
3. Literature survey The literature survey is done for the topic you have selected from previous years papers.
4. The conclusion of the literature survey Conclusion after Studying previous work on the selected topic.
5. Base Paper implementation We guide students on how to make a working model of project from selected base paper. Selected Base Paper is Implemented so that we can improve the result and Apply new Techniques for enhanced work.
6. Proposed work Implementation | Research Work New techniques are Designed and applied to the Working model or Simulation Circuit for Enhanced results. Complete Training is Given to the student on how to make a working model for your project.
7. New results and analysis The new results from a working model are taken out and compared with the previous working model.
8. Get result Verification from your mentor Verifying your work from college mentor/guide.
9. Thesis and Research paper Writing without Plagiarism. Complete thesis and Research paper for Final submission in college / University. Thesis/paper are made and edited and are completely plagiarism free and report on plagiarism is given to the students. We check thesis on the latest online software like Turnitin, plagiarism x checker etc .
10. Get Your Work Published in Leading Journals like IEEE, Scopus, UGC approved or as Required. We help students to published their research in Internal journals or as required by students.
more details.
We will guide you with our new innovative ideas forming from the recent research trends. We also provide a thesis online. We Provide Complete Assistance for Writing Research papers with the publication in IEEE journals, Scopus Index, UGC Approved Journals, Science Citation Indexed journals, Thomson Reuters and various reputed International Journals.
We have a perfect track record of students Completing their thesis work in one go. XiLiR Team believes in quality service with on-time Project Competition for Students. We have Experienced Engineers and Best Research Lab in New Delhi. Students from every state of India have successfully completed their thesis work with Great marks at XiLiR. We also help students online. By taking the online lectures from Software like any desk, Team Viewer, etc. We Also Provide a Ready-made thesis help in Delhi which plagiarism free for the students in less time Remaining.
XiLiR Technologies offer the best thesis to help New Delhi-NCR India.
Feel Free to Contact us for any inquiries like selecting projects | New ideas | Synopsis
HINDI SPEAKING +91-9810326343
ENGLISH SPEAKING +91-9911331389
How to contact us
Students looking for best help in Delhi India Delhi can contact XiLiR Technologies.XiLiR technologies best place of thesis-related problem whether it is for MTech or for Ph.D.
If you are M.Tech/ MSc., MCA. or Ph.D. student looking for thesis help in Delhi, Faridabad, Haryana, Jammu Kashmir, Punjab, Madhya Pradesh, Uttrakhand or any other place then you are at the right place.
XiLiR Technologies is India’s most popular R&D Company which provide complete Guidance, Training from scratch and complete hands on experience on academic projects for MTech | Ph.D. | BTech. Our team helps students to build their own projects on different technologies. XiLiR technologies is best for M.Tech Ph.D thesis help in INDIA.
Feel Free to Contact us for any inquiry like selecting projects | New ideas | Synopsis
You can contact or WhatsApp us on this any time
HINDI/ ENGL ISH SPEAKING +91-9810326343
HINDI/ ENGL ISH SPEAKING +91-9911331389
Email id : [email protected]
- B.Tech Project
- M.Tech Project
- Project Topic Selection Guidance
- Synopsis | Proposal Making
- Patent Related Help
- Research Paper Writing
- Research Publication
- other services
Gallery : XiLiR Technologies
Share this post
- Top Navigation
University Home Home Faculty of Engineering and Technology
- M.Tech. in Transportation Engineering
On this page
Transportation engineering is one of the major branches of civil engineering and it involves planning, design, construction, operation, and maintenance of transportation facilities. This field imbibes in each student analytic, problem-solving, and management skills suitable for public and private sector professional works. Students are trained on the application of various software and programming skills for simulation of traffic flow and Intelligent Transportation System (ITS) to address urban transportation issues. Even though there are a large number of institutions in India producing Transportation Engineers, there is a shortage of quality Transportation Engineering graduates. The graduates will get opportunities in well-known infrastructure companies involved in transportation planning and construction where they exhibit effective and efficient problem-solving skills to provide economical and sustainable solutions in India and abroad.
The Faculty of Engineering and Technology (FET) at RUAS plans further development of Transportation engineering and compete with the best universities in the world and attract high-quality graduates as well as teaching talent from all over the country and abroad.
Our program:
- Students will acquire advanced know-how concerning the planning, design, operations, performance, evaluation, maintenance, and rehabilitation of transportation systems including their economics and social aspects.
- We offer analytic, problem-solving and management skills suitable for public and private sector professional works.
- Students are trained in the application of various software and programming skills for simulation of traffic flow and Intelligent Transportation System (ITS) to address urban transportation issues.
- Addresses the professional service needs of the transportation industry like planning, designing, maintenance and evaluation of various transportation facilities.
- Includes study, simulation and the suggesting of remedial measures for various traffic issues.
- Includes opportunities in well-known infrastructure companies involved in transportation planning, construction, and management.
- Includes training in problem-solving skills to provide economical and sustainable solutions in India and abroad.
- Prudent, Well Qualified, and dedicated faculty members
- State of the art laboratories for postgraduate studies and research in pavement and traffic engineering
- More emphasis on projects from industry to maximized employability in transportation engineering
- Learner centric Outcome-based education
- World-Class learning facilities and emphasis on applied learning
- Collaborations with leading academic institutions across the globe
- Association with leading professional bodies
- Outstanding industry-institute interaction through guest lectures, industrial visits, internships, and workshops
- Best Group project award for “ Fabrication and Digitization of low-cost pot hole quantifying device” at Fourth National conference on road and infrastructure INFRA ROAD TECH 2019.
- Inception studies for Identification and improvements to black spots at Koppal and Raichur Districts” awarded by
Choice Based Certificate Courses
- Applications of Artificial intelligence and Machine learning in Transportation Engineering
- Mastering bitumen for bitumen roads and innovative applications
- Smart cities and Infrastructure
Accomplishments:
- Best paper award to Group projects and dissertations at various National level exhibitions and conferences
- Specialized courses like Applications of Artificial Intelligence in Transportation and Traffic Engineering
- Internship for postgraduate students at Moscow State University of Civil Engineering (MGSU)
- MoU’s with international universities like St. Petersburg University of architecture and civil Engineering, Moscow State University of Civil Engineering, University of Illinois at Chicago, Michigan Technological University
Online Elective
Students can choose elective courses online through MOOCs, SWAYAM, NPTEL and other equivalent platforms, adhering to guidelines prescribed by the University.
Group Project
A group project can involve up to 5 students who can work together in an interdisciplinary gorup of subjects, constituted with members from across faculty. Students are required to develop a report for assessment and also need to demonstrate the working of the product. The IPR rights of all such work lies with the University only.
Industry Internship or Project
A student can opt for an internship in an industry, a business or research organization during the module. Alternately, can undertake a mini-project requiring self-directed study that can be perused within the affiliated Faculty. It is also necessary for the student to submit a report and make a presentation to the members of the panel constituted by the HoD for assessment.
Dissertation and Publication
This course has two parts, and a student has to undertake thesis work in a chosen relevant topic. The topic needs to be approved by a committee constituted by a HOD. Later, students need to convert their thesis into a technical paper and publication to publish in reputed conferences or journals.
Programme Outcomes
- Evaluate different modes of transportation based on travel demand forecasting and travel demand distribution models
- Select appropriate materials and technology to design, construct, maintain and rehabilitate highways
- Apply artificial intelligence and Intelligent Transportation System (ITS) to solve urban transportation issues
- Use various software tools to model and simulate traffic flow to manage traffic issues
- Analyze and design various types of bridges for road and railway projects
- Develop and administer project budgets, fiscal control, contract, and quality control provisions
- Develop a career in the transportation industry
- Practice teamwork, lifelong learning, and continuous improvement University
- Prudent, well-qualified and dedicated faculty members.
- Learner-centric outcome-based education.
- World-class learning facilities and emphasis on applied learning.
- Includes internship, training and placement support with various universities worldwide.
- Emphasises projects from industry for maximum employability in transportation engineering.
- Offers a vibrant research ecosystem.
- Includes state of the art facilities in pavement engineering, traffic engineering, concrete and transportation material testing laboratories and computer-aided applications.
- Includes high standards of outstanding industry-institute interactions through guest lectures, industrial visits, internships, group projects, dissertations and workshops.
- Offers association with leading professional bodies.
- Ensures fully-structured job oriented courses.
Life at RUAS
- We offer accommodation in student hostels on our campus, and even offer third-party off-campus hotels where necessary to ensure students can focus on what matters the most.
- Our on-campus facilities include WiFi any time of the day, 24/7.
- From a host of eateries and laundry facilities, we ensure that students have access to all facilities.
- We encourage students to participate in co-curricular activities on campus which include sports and cultural events, both at a university level and a faculty level.
- We help students focus on independent and sponsored research with projects and a dissertation.
Study Domains
Course specialisation.
- Includes advanced knowledge and an understanding of transportation engineering with higher order critical, analytical, problem-solving and transferable skills. Ensures the ability to think rigorously and independently to meet higher level expectations of transportation industry, academics, research or take up entrepreneurial route.
Department — Common Course
An interactive deep dive into the core domain of transportation engineering, including construction planning and contract management artificial intelligence and finite element analysis.
Mandatory Courses
- An overview of pavement engineering, traffic engineering, transport planning, airport engineering, railway engineering, and intelligent transport systems.
Students can choose from a list of courses offered across the university from multiple disciplines to earn credits.
Elective Module
- Active participation and output-based projects, seminars and internships in industry.
Faculty Common Modules
- Students can choose from subjects offered within civil engineering to develop a sharper skill in any of these electives.
Course Progression
Course | Credits |
---|---|
19TRC501A Theory Practicals | 4 |
19TRC502A Theory Practicals | 4 |
19TRC503A Theory Tutorials Practicals | 5 |
19TRE51XA Theory | 4 |
19TRE52XA Theory | 4 |
19FET508A Theory | 2 |
19FET509A Theory |
Course | Credits |
---|---|
19TRC511A Theory Tutorials Practicals | 5 |
19TRC512A Theory Tutorials | 4 |
19TRC513A Theory Tutorials | 4 |
19TRE53XA Theory | 4 |
19TRE54XA Theory | 4 |
19FET510A Theory |
Course | Credits |
---|---|
19TRP501A Practicals | 4 |
19TRP502A Practicals | 8 |
Course | Credits |
---|---|
19TRP522A Practicals | 24 |
Semester 4 (Electives)
Stream/Specialisation | Elective | Course Title |
---|---|---|
Group 1 | E11 | Geometric Design of Highways and Expressways |
Group 1 | E12 | Advanced Concrete technology and modern construction techniques |
Group 1 | E13 | Transportation Geotechnics |
Group 1 | E14 | Statistics for Transportation Engineers |
Group 2 | E21 | Direct Stiffness method and Finite element analysis |
Group 2 | E22 | Green construction and Alternative building materials |
Group 2 | E23 | Tunnel Engineering |
Group 2 | E24 | Advanced Structural Materials |
Group 2 | E25 | Design of Formwork and Precast Structures |
Group 3 | E31 | Bridge Engineering and Road Projects |
Group 3 | E32 | Harbours and Dock Engineering |
Group 3 | E33 | Smart Cities and Sustainable Infrastructure |
Group 3 | E34 | Environmental Impact Assessment for Civil Engineering Projects |
Group 4 | E41 | Application of AI in Transportation Engineering |
Group 4 | E42 | Pavement Construction, Evaluation, Maintenance and Management Systems |
Group 4 | E43 | Highway Economics, Finance and Road Safety Management |
Group 4 | E44 | Construction Equipment and Management |
*Elective Courses
There are 4 electives in the programme. The electives are grouped such a way that a student can choose a set of electives to specialize in a chosen field/stream. However, if the student wishes to opt for elective course that spans multiple streams, the case may be considered subject to the affordability of academic logistics and approval by the course leader, HODs and Deans. For every elective offered, there will be a minimum and a maximum number of registrations that is decided by the department. There is also a provision for the students to choose Electives through on-line mode such as MOOC’s, SWAYAM, NPTEL and other equivalent platforms. The guidelines prescribed by the University for such Courses to be adhered to. The student can also earn 3 or 4 credits by participating in the international competitions like technical presentation/conference/publications in the journal etc and winning the award in that. In that case he/she can be exempted from one of the elective courses of the programme.
Teaching and Assessment
During each semester, students’ performance is assessed through Continuous Evaluation (CE) which includes teacher interaction, session examination and a Semester End Examination (SEE). CE and SEE weightages carry equal weightage.
Students are awarded grades based on the marks scored.
Key Skill Development
- Ability to evaluate different modes of transportation based on travel demand forecasting and travel demand distribution models .
- Ability to develop and administer project budgets, fiscal control, and contract and quality control provisions.
- Ability to select appropriate materials and technology to design, construct, maintain and rehabilitate highways.
- Ability to apply artificial intelligence and Intelligent Transportation System (ITS) to solve urban transportation and traffic issues.
- Ability to use various software tools to model and simulate traffic flow to manage traffic issues.
- Ability to analyse and design various types of bridges for road and railway projects.
- Ability to develop a career in the transportation industry.
- Ability to practice teamwork, lifelong learning, and continuous improvement.
Eligibility
Indian nationals.
- Candidates must have a BE/B.Tech. or equivalent degree in Civil Engineering, Architecture, Construction Technology, Mechanical, Aeronautical, Transportation Engineering, Automotive/Automobile, Industrial Production Engineering or allied disciplines related to Civil Engineering.
- Candidates who belong to SC/ST categories are given a different qualifying mark as per government notifications.
Application Process
University quota.
All students seeking admission are required to contact the admissions department for more details.
Through Government of Karnataka Quota
- PGCET, Counselling and Selection (PGCET Code T945)
- Download the admission form
- Submit completed form and documents at the University Admissions Office
- Pay fees online or through DD at the University admission office.
Fees & Scholarships
Government Seats:
- As per Government of Karnataka for Indian nationals
University Seats:
- Refer Fee Structure
International Students, OCI / NRIs, SAARC
International students/oci/nri.
- Candidates must have passed in equivalent and eligibility equivalence from AIU (Association of Indian Universities).
- Candidates should have proof of proficiency in English with a minimum TOEFL score of 8.
- Download the admission form
NRI/ Foreign Students:
- USD 6000 + Other fee Rs.38,550 per annum
Start your journey with RUAS
- M.Tech Programme Regulations 2019 pdf | 1.3 MB
- M.Tech (TE) Programme Specifications 2018 pdf | 560.2 KB
- M.Tech (TM) Programme Specifications 2019 pdf | 613.3 KB
- M.Tech (TE) Programme Specifications 2020 pdf | 712.8 KB
- M.Tech. in Data Science and Engineering
- M.Tech in Artificial Intelligence & Machine Learning
- M. Tech. in Power Electronics and Drives
- B.Tech. in Electrical and Electronics Engineering
- B.Tech. in Electronics and Communication Engineering
- B.Tech. in Information Science and Engineering
- B.Tech. in Mathematics and Computing
- B.Tech. in Mechanical Engineering
- B.Tech. in Robotics
- B.Tech. in Civil Engineering
- M.Tech. in Construction Engineering and Management
- M.Tech. in Environmental Engineering and Management
- M. Tech. in Automotive Engineering
- B.Tech. in Aerospace Engineering
- B.Tech. in Automotive Engineering
- M.Tech. in Aerospace Engineering
- B.Tech. in Computer Science and Engineering
- B. Tech. in Artificial Intelligence and Machine Learning
- M. Tech. in Advanced Machinery Design
- M. Tech. in Manufacturing Technologies and Engineering Management
- M.Tech. in Robotic Engineering
- M.Tech. in VLSI and Nanotechnology
- Electric Transportation
- Embedded System
- Machine Learning
- Mechanical Design
- M. Tech. in Structural Engineering
IMAGES
VIDEO
COMMENTS
New Technologies in Short Span Bridges: A Study of Three Innovative Systems, Andrew Lahovich, Civil Engineering. PDF. Driver Dynamics and the Longitudinal Control Model, Gabriel G. Leiner, Civil Engineering. PDF. Interfacial Strength Between Prestressed Hollow Core Slabs and Cast-in-Place Concrete Toppings, Ryan M. Mones, Civil Engineering. PDF
CE Time Table for 2023-24 for I semester; CE Schedule of Courses for 2023-24 for I Semester
1 . Waibhaw Kumar. Fire Performance of Structural Hollow Steel Tube Columns With And Without Infills. Prof. Umesh Kumar Sharma. 01/Feb/2024. 2 . Ananya Bijaya. Exploration of Fracture Anisotropy, Multiscale Mechanics and Dynamics Fracture through Phase-Filed Method. Prof. Rajib Chowdhury.
On completion of M. Tech. (Structural Engineering) programme, graduates will be able to PSO_01: Analyse and design reinforced concrete structures and steel ... CLE6099 Master's Thesis 0 0 0 0 16 . M.TECH. (MST) Page 8 M. Tech. Structural Engineering Programme Core S. No. Course Code Course Title L T P J C 1. ...
Final reporting & Thesis submission TEXT BOOKS: 1. Relevant books as per Supervisor /Guide REFERENCE BOOKS: M.TECH. IN STRUCTURAL ENGINEERING Aug-2021 MTech_ST@CE Page-7/35 SUBJECT CODE SUBJECT L-T-P CREDIT DEVELOPER ... M.TECH. IN STRUCTURAL ENGINEERING 2. Code Program (L) (T) (P)
This final copy of the thesis must be submitted to Academic section (Assistant Registrar, Academics) through the M. Tech. program Coordinator/Advisor. A soft copy of the thesis on a Compact Disk must also be submitted along with the hard copy of the thesis. 1.2. Title of the Thesis and Title page format.
m Tech Structural Engineering Thesis Topics - Free download as PDF File (.pdf), Text File (.txt) or read online for free. Scribd is the world's largest social reading and publishing site.
The document discusses writing an M.Tech thesis on structural engineering. It describes how writing a thesis requires extensive research, analysis, and precise articulation of findings. It also notes that every step, from formulating a research question to presenting arguments, demands meticulous attention to detail. However, the document offers assistance from HelpWriting.net, where ...
The purpose of this manual is to provide broad guidelines to the M.Tech candidates for the preparation of the thesis. It lists the general and specific requirements governing the thesis preparation including guidelines for structuring the contents. The candidates are advised to have thoroughly gone through the up-to-date M.Tech Ordnances, and other
m.tech Thesis Topic - Free download as Word Doc (.doc / .docx), PDF File (.pdf), Text File (.txt) or read online for free. The document discusses potential thesis topics in structural engineering, including: 1. Analyzing the seismic performance of carbon fiber wrapping on concrete structures using modeling software. 2. Examining the use of carbon fiber wrapping to improve the seismic ...
Contact Us: Mahatma Gandhi Central Library Indian Institute of Technology Roorkee Roorkee - 247667 Uttarakhand (India) Email: [email protected] 01332-285239
Structural engineering is the science and art of planning, design, construction, operation, monitoring and inspection, maintenance, rehabilitation and prevention, demolishing and dismantling of structures taking into consideration technical, economic, environmental, aesthetic and social aspects. This Group is the largest amongst the six Groups ...
Machine Learning Models for Computational Structural Mechanics. Download (60.69 MB) thesis. posted on 2024-06-06, 06:59 authored by Mehdi Jokar. The numerical simulation of physical systems plays a key role in different fields of science and engineering. The popularity of numerical methods stems from their ability to simulate complex physical ...
M Tech Thesis. July 2015; Authors: ... Science and Engineering from Institute of T echnical Education and Researc h, ... For example, one can detect structural faults (e.g., fatigue-induced.
The curriculum has been so designed as to give exposure to the students on areas of structural analysis, design, detailing and construction. The course also includes the use of general purpose application oriented computer software in the field of Structural Engineering using finite element analysis and optimization techniques. The students ...
These project topics may need numerical modelling, experimental works, or combination thereof. Pushover analysis - cyclic loading, deterioration effect in RC Moment Frames in pushover analysis. Rehabilitation - Evaluation of drift distribution. Analysis of large dynamic structure in environment industry. Theoretical study on High frequency ...
Thesis and Powerpoint project of M.Tech Structural Engineering - Free download as PDF File (.pdf), Text File (.txt) or read online for free. This dissertation examines the impacts of internal solitary waves on a submerged floating tunnel through numerical modeling. The author uses finite element modeling to analyze how oceanic internal solitary waves affect a prototype submerged floating ...
HINDI/ ENGLISH SPEAKING +91-9810326343. HINDI/ ENGLISH SPEAKING +91-9911331389. Email id : [email protected]. Structural Engineering Projects thesis IEEE base. M.Tech engineering project thesis developer in India. Civil structural engineering project list.
Structural Engineering; Transportation & Urban Development Engineering; Utilities, Pipelines, Surveying Engineering ... Blast response mitigation strategies can be incorporated in the structural design at concept stage, leading to a well-designed and -constructed structure that can exhibit improved blast resistance and at the same time maintain ...
M. Tech Course in STRUCTURAL ENGINEERING CURRICULUM STRUCTURE FIRST SEMESTER A. THEORY Sl. No. Code Subjects Contacts (Period / Week) Credits L T P Total 1. SE (CE) 101 Advanced Engineering Mathematics 3 1 0 4 4 2. SE102 Industrial Management 4 0 0 4 4 3. SE103 Advanced Structural Analysis 4 0 0 4 4 4.
M. Tech. Structural Engineering (Semester I) Courses and Codes CODE SUBJECT L T P SE501 Matrix Methods in Structural Analysis 3 0 2 SE502 Structural Dynamics and Earthquake Engineering 4 0 2 SE503 Advanced Solid Mechanics 3 2 0 SE504 Advanced Design of Steel Structures 3 0 2 ...
m Tech Thesis Structural Engineering - Free download as PDF File (.pdf), Text File (.txt) or read online for free. m tech thesis structural engineering
Overview. Transportation engineering is one of the major branches of civil engineering and it involves planning, design, construction, operation, and maintenance of transportation facilities. This field imbibes in each student analytic, problem-solving, and management skills suitable for public and private sector professional works.
civil engineering Thesis of m tech - Free download as PDF File (.pdf), Text File (.txt) or read online for free. The document discusses a study on the influence of soaking on the CBR (California Bearing Ratio) value of soils in Madhya Pradesh, India. The study was conducted to fulfill the requirements of a Master of Technology degree in Transportation Engineering.