- Thesis Advisor
1: DIGITAL TWIN FOR INTEGRATION OF DESIGN- MANUFACTURING – MAINTENANCE
Digital twin systems provide design-manufacturing-maintenance platforms that are unified and intelligent in that processes can be inferred and risks mitigated. Creating a digital twin follows a series of steps. First, a blueprint for its functionality is outlined. Second, the digital base twin is developed using AR tools such as IoT and 3D visualizations. Third, the digital environment is scaled to capture the physical environment. Finally, its capability is refined through navigation nodes built by machine learning and AI.
TOPIC 2: 3D PRINTING INFRASTRUCTURE FOR DATA MANAGEMENT AND CLOUD-BASED ADDITIVE MANUFACTURING
3D printing processes are efficient in providing cheap, quick and versatile manufacturing. The 3D printing process starts with a CAD model designed using 3D software such as Maya, ZBrush and Houdini. An STL (3MF File) is generated and transformed into a G-code, which is fed to a 3D printer for part printing.
TOPIC 3: CFD ANALYSIS OF TROMBE WALLS
Unlike traditional walls, Trombe walls are exposed to the sun and used as solar thermal collectors to provide clean energy during cold winters. To analyze the performance of Trombe walls and their characteristics, a commercial CFD package such as SolidWorks is used to carry out the CFD analysis. Theoretical models will then be used to validate the CFD analysis.
TOPIC 4: CHARACTERIZATION OF FLOW AROUND A TIDAL ENERGY PLATFORM
With increasing energy demand, alternative energy sources such as floating tidal energy devices are gaining popularity. The project simulates and investigates water flow around a simplified tidal energy prototype and compares the results obtained to existing data to determine the efficiency and practicability of tidal energy sources.
TOPIC 5: INVESTIGATING THE APPLICATION OF IOT IN AUTONOMOUS AND CONNECTED VEHICLES
The Internet of Things is the connection of devices to the cloud to share data and enhance the users’ experience. Connecting an automobile to the IoT enables autonomous functioning as directions and mapping can be obtained using information collected from sensors. An analysis of IoT as related to automobiles involves analyzing the technologies such as DSRC, radar and 5G used in adaptive cruise control and different automation levels to conclude their pros and cons.
TOPIC 6: EVALUATION OF ALTERNATIVE LIQUID FUELS IN THE INTERNAL COMBUSTION OF AUTOMOBILES
Combustion of fuels, when not efficient, results in pollution and fuel wastage. With increasing sustainability efforts globally, alternative liquid fuels are being adopted. This investigation is done to determine the effect of alternative fuels (such as Di Methyl Ether, methanol and alcohol) on the combustion characteristics of an automobile, the environmental impact through emissions and their compatibility.
TOPIC 7: MANAGEMENT OF ALUMINIUM WASTE
Many products are made of aluminium (from cans to electrical wires), making it the most used metal. This project is aimed at recycling aluminium cans. The process focuses on turning the waste cans into powder. To do this, a low-cost copula mini furnace is designed using SolidWorks software and fabricated to heat aluminium. Atomizers are added to the furnace to create a powder, which is easier to recycle and dispose of.
TOPIC 8: INTERACTION BETWEEN FLUID, ACOUSTICS AND VIBRATIONS
Vibrations determine most designs, fluids power most actuators (pneumatic and hydraulic), and acoustics is how we interact with sound waves. This project focuses on the interaction of these three aspects (creating a vibration on a structural object carrying a fluid creates sound waves) and how they travel and can be harnessed. Understanding this interaction is useful for advancing other fields, such as energy collection and materials.
TOPIC 9: INVESTIGATION OF PHOTOVOLTAIC-THERMAL SYSTEMS FOR BUILDING, HEATING AND POWER SUPPLY
The project is focused on designing and analyzing a PVT system that can be installed in buildings. These units installed in buildings should facilitate driven heat, power generation, and supply. First, a conceptual design of the system will be constructed, followed by computer modelling and optimization of the system and finally, an analysis of the system’s environmental and economic benefits and energy-saving capabilities.
TOPIC 10: QUADCOPTER BLADE DESIGN AND OPTIMIZATION
The CFD method is used to design and optimize the quadcopter blade. ANSYS Workbench (Space Claim and FLUENT) package is used for the CAD design generation as it offers a range of areas where analysis can be carried out on the design. The 3D model of the design of the blade is created using a 3D printer. This design is the prototype that will be used in the analysis and optimization.
TOPIC 11: INVESTIGATION OF ACOUSTIC PERFORMANCE OF AN INDUSTRIAL EXPANSION SILENCER
This is also called a transmission line fitter. In this project, an industrial expansion silencer is designed to effectively block out background noise with an expansion length (L) that peaks at odd quarter-wavelength frequencies and zeros at even half-wavelength frequencies. Additionally, acoustic wave interference phenomena are investigated as it affects the expansion chamber’s performance.
TOPIC 12: INVESTIGATION OF ACOUSTIC PERFORMANCE OF COMBUSTION CHAMBER LINERS
The main cause of combustion noise and, by extension, combustion instabilities (which decrease engine performance, increase vibrations and increase engine failure rate) is the interactions between combustion liners and air flows. An investigation on how to reduce noise levels, increase combustion efficiency and gas turbine combustion chamber lifespan is a much-needed development.
TOPIC 13: DESIGN OPTIMIZATION OF A CENTRIFUGAL PUMP USING CFD
Centrifugal pumps are widely used, requiring optimization for high pressure, high heat and chemically toxic environments. A study on optimizing the centrifugal pump through computational fluid dynamics lowers cavitation and failure rates while in use. For this analysis, the ANSYS workbench is used for simulating and optimizing at saturation points
TOPIC 14: COMBUSTION AND ENERGY SYSTEMS
Combustion is often needed to provide the energy required by various systems. This research aims to identify and improve the relationship between combustion and energy systems.
TOPIC 15: CFD ANALYSIS OF A MASTER CYLINDER
The master cylinder is a major component that determines the performance and efficiency of many machines. In this research project, the master cylinder is designed using CATIA V5 software and analyzed using ANSYS 16.2. Based on stress and pressure responses, a construction material is chosen. The properties of the cylinder are also examined. Finally, its uses in mechanical engineering will be explained.
TOPIC 16: MODELLING THE PROPERTIES OF AND MANUFACTURING A PEARLITIC RAIL STEEL 900A
This study will investigate the potential of modified Pearlitic rail steel of grade 900A in the rail industry. It will examine how the structure’s tensile strength, load capacity, and impact resistance may be altered. Additionally, the RVE model (representative volume elements) is used to determine the impact of the bainitic phase on its properties by identifying its microstructural characteristics.
TOPIC 17: A CFD ANALYSIS OF WELLBORE FLOW BEHAVIOR NEAR A HYDROCARBON RESERVOIR
Fluid flow from a hydrocarbon reservoir to a wellbore is complex as both pressure and flow rates change over time. This research used CFD to understand the radially symmetric flow dynamics from a hydrocarbon reservoir to a wellbore. The nonlinear flow from the wellbore is analyzed using 3D Navier-Stokes equations. Both velocity and pressure are coupled into one system and solved using the algebraic multigrid method. The Darcy model for the reservoir flow and the pressure diffusivity equations are used to verify the CFD. The inflow performance relations curve analyses the flow through the wellbore.
TOPIC 18: DESIGNING OF A DYNAMIC ANKLE FOOT ORTHOSIS
Ankle foot orthoses aid the rehabilitation of feet after suffering from drop foot as it facilitates a range of motion in the ankle joint, including flexion, abduction, extension, and adduction. The customization of this orthosis involves scanning technologies and geometry acquisition, custom designing using 3D software, design and finite element analysis, gait analysis, 3D printing or other additive manufacturing, mechanical testing and functional evaluation. Controllable from a distance, the gadget will use an electric motor to move in the desired direction.
TOPIC 19: DESIGN AND ANALYSIS OF METAL PODS UNDER DEEP SEA
In this research, a remotely operated deep-sea pod used to transport study and exploratory equipment below the ocean surface to its floor is designed using Siemens NX, fabricated using 17-4 PH stainless steel of grade H900 and analyzed using ANSYS workbench.
TOPIC 20: USING CFD TECHNIQUES TO DESIGN AN ENERGY-EFFICIENT HVAC SYSTEM
Heating, Ventilation and Airconditioning systems are central to many structures as they maintain optimal temperatures and ensure air circulation. As these systems consume a lot of energy, this project aims at improving their efficiency. The 3D model is done using SolidWorks, while the CFD simulations are carried out in ANSYS CFX.
TOPIC 21: DESIGN OPTIMIZATION OF A SHELL AND TUBE HEAT EXCHANGER
This study examines how baffles influence heat transmission in a shell and tube design. SolidWorks is used for 3D CAD modelling and ANSYS for CDF analysis.
TOPIC 22: THE STRESS ANALYSIS OF TWIN-SCREW GAS COMPRESSOR’S COMPONENTS
The project aims to determine the stress pattern or characteristics of the different components that make up the twin-screw gas compressor. These patterns are determined by carrying out a finite element analysis of the gas compressor. Once analysis is complete, a more efficient model will be proposed to increase the compressor’s life span.
TOPIC 23: STRESS ANALYSIS ON SCROLL COMPRESSOR COMPONENTS
As a scroll compressor is exposed to pressure and heat deformations while in operation, its structural and mechanical analysis is vital in design and fabrication. In this project, this analysis is carried out using CAE, such as ANSYS and NX. This ensures the optimization of the design.
TOPIC 24: CFD ANALYSIS OF AERODYNAMIC BRAKES IN RACE CARS
The aerodynamic braking system is installed in race cars as a flab attached to the bonnet. The flab is retractable and only operational when braking by increasing the drag force. Detailed analysis of the aerodynamics of a race car in relation to the brake (flab) performance improvement will be carried out using CFD.
TOPIC 25: HOUSE HEATING BY SOLAR ENERGY
House heating in cold regions accounts for up to 30% of the national energy, thus resulting in high carbon emissions for fossil fuel-dependent countries. Solar panels are used to reduce the resultant carbon print. To install a solar home heating system, one needs a simple, cost-effective, easy-to-clean and easy-to-install design.
Anthropology thesis statement examples.
Your email address will not be published. Required fields are marked *
Save my name, email, and website in this browser for the next time I comment.
Home > ETD > Mechanical Engineering > ETDM_MECHENG
Theses/dissertations from 2023 2023.
Development of a finite element analysis model for fatigue crack propagation of energy storage flywheel rotors , Ailene B. Nuñez
An application of multi-criteria decision Analysis Methods in the Design of Alternative-Fueled Vehicle Systems for Different Transportation Sectors in the Philippines , Jaime Alonzo M. Poblete
Analyzing the impact of EV charging to the power grid with emphasis on behavioral factors and charging infrastructure availability , Adrian A. Allana
Scenario analysis of policies supporting electric jeepney adoption using hybrid agent-based system dynamics model , Jeun Rei Benitez Barlis
Detection of cloudy spot defects on PET preforms using machine learning , Isabelle D. Co
Interfacial delamination analysis on fan-out wafer-level package using finite element method , Ariel P. Conversion
Spatiotemporal modeling of electric vehicle charging demand for strategic EV charger deployment in Metro Manila , Edwin Bernard F. Lisaba Jr.
Finite element analysis of active metal braised semiconductor package for warpage reduction , Roberto Louis P. Moran
A study on microalgal biorefinery system with use phase uncertainty and allocation analysis , Earle Anderson Sy Ng
Evaluation of the effects of electric vehicle battery cells layout and conductive sheet fins thickness to battery cooling using transportation micro-simulation modeling and finite element steady-state thermal analysis , Joshua Ezekiel Dimaunahan Rito
Spatial investigation of energy equity with consideration of the renewable energy transition , Christian Roice Tayag
Swarm object transportation through phase transitions , Joseph Aldrin T. Chua
BEM theory analysis of a small biomimetic HAWT , Von Eric A. Damirez
Development of a life cycle assessment for chemical looping combustion , John Patrick D. Mercado
Multi-country analysis of driving factors to carbon emission using LMDI decomposition analysis method and rough set modeling , Mouy Meta
Multi-country analysis of driving factors to carbon emissions using LMDI decomposition analysis method and rough set modeling , Meta Mouy
Quadrotor drone manipulation using neuro fuzzy algorithm with non-invasive brain-computer interface , Timothy Scott C. Chu
Prediction and optimization models for integrated renewable-storage energy systems in mixed-use buildings , Aaron Jules R. Del Rosario
Development of a UAV with hand gesture recognition using deep learning , Calvin Alexander Y. Ng
Configuration enhancement for the flight endurance of a separate-lift-and-thrust hybrid unmanned aerial vehicle using Gaussian process optimization , Francis Gregory L. Ng
Cooling load calculation and AHU equipment selection for a nutritional dry blend facility , John Paul Christian L. Benosa
Design criteria assessment for ball grid array semiconductor packaging based on thermomechanical simulation and crack analysis , Niño Rigo Emil G. Lim
Development of a predictive aeration strategy for microalgae cultivation in photobioreactors , Jeremy Jay B. Magdaong
Assessing energy security cost of the transport sector , Jimwell L. Soliman
Fabrication and characterization of lead tin telluride (Pb1-x SnxTe) thermoelectric nanomaterial using horizontal vapor phase growth technique (HVPG) , Sam Sopheap
Bilevel fuzzy optimization model of an algae-based eco-industrial park under cooperative game theory , Kyle Darryl T. Aguilar
A fuzzy-genetic robust optimization framework for UAV conceptual design , Lemuel F. Banal
Performance analyses of low Reynolds number airfoils for small-scale horizontal axis wind turbines , John Christian T. Chua
An evaluation methodology with applied life-cycle assessment of coal-biomass cofiring in Philippine context , Dan William C. Martinez
Hydrodynamic investigation and characterization of a photo-bioreactor for microalgae cultivation , Andres Philip Mayol
Computational fluid dynamics analysis on the performance of the new design of savonius wind turbine for urban wind energy exploitation systems , San Rathana
A vacuum drying characterization and optimization of spirulina sp. using definitive screening design of experiment , Christian Joseph C. Ronquillo
Development of supply chain based fuel cycle inventory model for the Philippines , Alexis Mervin T. Sy
Optimization of one-part geopolymer based on fly ash and volcanic ash for soil stabilization , April Anne S. Tigue
Performance, emission and net energy analysis of a diesel genset using producer gas from jatropha press-cake in dual fuel miode , Nechoh A. Arbon
Optimization of in situ transesterification of wet microalgae chlorella vulgaris under subcritical conditions , Charles B. Felix
Regional feasibility analysis of wind and solar renewable technologies in the Philippines using analytic hierarchy process (AHP) , Neil Stephen A. Lopez
Development of gas leak detection system using fuzzy logic, optical flow and neural networks , Edgar Carrillo II
Synthesis and characterization of silver-titanium dioxide nanomaterials via horizontal vapor phase growth (HVPG) technique for antibacterial applications , Muhammad Akhsin Muflikhun
Combustion effect of jatropha producer gas fumigation in a stationary diesel genset , Monorom Rith
Investigation of the effects of a blade profile geometry in a hinged blade cross axis turbine , Arvin H. Fernando
Design of a fuzzy GS-PID controller for payload drops of varying mass for a quadrotor , Ivan Henderson V. Gue
Energy audit of St. Joseph Hall and Miguel Hall of De La Salle University , Oswald D. Sapang
Experimental evaluation and net energy analysis of methane gas production through anaerobic digestion of jatropha press-cake and pig manure , Jeremias A. Gonzaga
A study on the performance of jatropha press cake-coal cofiring in a fluidized bed combustion system , Maria Flor De Liza F. Jarquio
A molecular study on the effects of osmotic pressure on the lipids of microalgae chlorella vulgaris , Robby B. Manrique
Automated bulk cartoning of folded sachet linked strips using constrained gravity stacking , Aaron Dee Bea
Vision based pedestrian detection using histogram of oriented gradients, adaboost, linear support vector machines and optical flow , Samantha Denise Fuentes Hilado
Optimization of power train components of electric tricycle based on life cycle cost , Precious L. Alvarez
Research on life-cycle based simulation of the integration of compressed natural gas (CNG) buses in the Philippine transport sector , Lawrence M. Bersales
Energy modeling, fabrication and evaluation of a small-scale natural convection solar dryer for microalgae biofuel production , Neil Stephen A. Lopez
Life Cycle Assessment (LCA) of utilizing rice husk as alternative in Portland clinker production fuel , Daniel Joseph P. Mariano
Design and optimization of a propeller type micro-hydro turbine using computational fluid dynamics , Isidro Antonio V. Marfori III
A design analysis for small horizontal-axis wind turbine (HAWT) 3-bladed rotor , Byron Michael Codilla Omboy
Optimizing the extraction of oil from sugarcane bagasse using thermochemical liquefaction , George Herbert L. Ang
Computer based evaluation of environmental impact of co-generation system of Distileria Bago, Inc. , Rofuat L. Lu
Emergy analysis for materials selection of small hydropower station , Rey L. Rifareal
An energy audit study of manufacturing operations in the Philippines , Yuri Sangala
Design, fabrication, and testing of flexible noodle separator in pouch noodle packing , Karlo Roman C. Garcia
An energy audit study of Cavite State University Indang, Cavite , Ronald P. Peña
Design and experimental analysis of a combined target fluidic and centrifungal pump system as a tachometer transducer , Lawrence K. Uy
Design, fabrication and performance testing of stationary freezer of Jollibee Food Corporation using non-CFC refrigerator (R-404A) , Kenways S. Chee
A study on the co-combustion of rice hull and low-grade coal using a fluidized bed combustion system , Stevan S. Dimaguila
Performance curve generation of an unglazed transpired collector system for a fish and crop solar drier , Jose Bienvenido Manuel M. Biona
Spectrally selective visible and solar transmitting heat barrier coating for flat-plate collector , Reynaldo C. Muli
Using fuzzy logic in the governing system of a micro-hydro power plant , Laurence A. Gan Lim
PC-based retrofitting designed for the automation of a conventional milling machine , Richard Alducente Bayona
Occupational health and safety program for the U.S. Metal Industry Company, Inc. , Ronaldo A. Juanatas
Development of a maintenance program for the stamping, drawing, and bending divisions U.S. Metal Industry Co., Inc. , Joselito H. Recio
Occupational health and safety program for the metalcasting technology division of the Metals Industry Research and Development Center , Arnel O. Valdez
Bottling line modification project in Bacolod brewery , Maximo A. Merilo
Design and evaluation of a calibration station for liquid types of flowmeters using water as test medium , Roxan De Luna Roxas
Design and evaluation of locally-fabricated water-pumping windmill for small-scale irrigation , Pablito O. Anino Sr.
The design of an instrumented charpy impact tester using the deconvolution method , Alvin Y. Chua
Design and evaluation of waste heat recovery refrigeration apparatus , Jimmy Guillena
Computer modeling and simulation of a single cylinder, 4-stroke cycle, gasoline fueled spark ignition engine , Martin Ernesto L. Kalaw
Laboratory-scale combustion of coal-oil mixtures , Gileo Capagngan Sulla
Advanced Search
Home | About | FAQ | My Account | Accessibility Statement
Privacy Copyright
Open Access Repository of University of Idaho Graduate ETD
An open access repository of theses and dissertations from University of Idaho graduate students. The collection includes the complete electronic theses and dissertations submitted 2014 - 2023, as well as, select digitized copies of earlier documents dating back to 1910.
computer science ecology electrical engineering natural resource management mechanical engineering plant sciences water resources management education civil engineering environmental science animal sciences forestry engineering materials science agriculture biology chemical engineering wildlife management
natural resources education mechanical engineering computer science electrical and computer engineering plant, soil and entomological sciences civil engineering environmental science english water resources movement & leisure sciences animal and veterinary science anthropology chemical and materials science engineering geology curriculum & instruction bioinformatics & computational biology chemistry
1910 to 2023 View Timeline
1893 PDFs 395 Records 147 Embargoed ETDs View table
Metadata CSV Metadata JSON Subjects JSON Subjects CSV Timeline JSON Facets JSON Source Code
Experience University of Idaho with a virtual tour. Explore now
Helping to ensure U of I is a safe and engaging place for students to learn and be successful. Read about Title IX.
Review the events calendar.
The largest Vandal Family reunion of the year. Check dates.
U of I's web-based retention and advising tool provides an efficient way to guide and support students on their road to graduation. Login to SlateConnect.
Engineering Physics Building Rm. 324K
Mechanical Engineering University of Idaho 875 Perimeter Drive MS 0902 Moscow, ID 83844-0902
Phone: 208-885-6579
Email: [email protected]
Email: [email protected]
Career information is not specific to degree level. Some career options may require an advanced degree.
in ID, WA, OR, MT and HI
Entry-Level
Senior-Level
137K |
140K |
144K |
146K |
149K |
Employment trends and projected job growth in ID, WA, OR, MT & HI
*Job data is collected from national, state and private sources. For more information, visit EMSI's data sources page .
View the M.S. Mechanical Engineering prerequisites, deadlines and contact information on the U of I Admissions website .
View Mechanical Engineering Graduate Handbook (PDF)
Defense Evaluation Rubric (PDF)
View current Mechanical Engineering courses Catalogs are released each year with up-to-date course listings. Students reference the catalog released during their first year of enrollment. For catalog related questions, email [email protected] or call 208-885-6731.
View Future Course Plan (PDF) This course plan lists the graduate courses and technical electives we intend to teach. It is subject to change without notice.
A graduate committee will follow an outcomes assessment rubric through a combination of guided discussion with the degree candidate and in discussion as a committee. The committee will submit a report to the graduate committee, who will perform an assessment of these results and report to the faculty. The faculty will follow up on ways to close the loop to improve the program.
Completion of the program will count towards eligibility for the Professional Engineer's License (PE) to practice Engineering , which requires a four-year degree from an ABET-accredited school, four years of experience under a PE, and passing the Fundamentals of Engineering (FE) and Principles of Practice in Engineering (PE) Exams.
For questions relating to Mechanical Engineering degrees, please email [email protected] or call 208-885-6579.
The University of Idaho is awarded more than $100 million in annual grants, contracts and research appropriations.
For more funding options, visit the College of Graduate Studies’ funding website .
Our college offers 20+ clubs and organizations tied to international and national engineering organizations, including national competition teams.
Learn about clubs related to your major:
Prepare for the vast opportunities in mechanical engineering with an advanced degree that lets you model, design and lead experiments to verify thermal systems, mechanical systems, components and processes while considering real-world constraints and the impact your solution may have on society.
Students completing this degree are well prepared to work in a national laboratory, or in an industrial research and development setting.
Masters student Jacob Miller pulls together team of engineering graduates to build prosthetic arm for a childhood friend
Read About The Prosthetic
IMAGES
VIDEO
COMMENTS
Dissertation Topics in Mechanical Engineering Design and Systems Optimization. Topic 1: Mini powdered metal design and fabrication for mini development of waste aluminium Cannes and fabrication. Topic 2: Interaction between the Fluid, Acoustic, and vibrations. Topic 3: Combustion and Energy Systems.
Waterproofing Shape-Changing Mechanisms Using Origami Engineering; Also a Mechanical Property Evaluation Approach for Rapid Prototyping, Andrew Jason Katz. PDF. Hydrogen Effects on X80 Steel Mechanical Properties Measured by Tensile and Impact Testing, Xuan Li. PDF. Application and Analysis of Asymmetrical Hot and Cold Stimuli, Ahmad Manasrah. PDF
Note: This article is partially based on the 2017-2018 MechE Graduate Student Guide (PDF).Please check the latest guide for the most-up to date formatting requirements. Criteria for Success. A strong thesis proposal… Motivates your project and introduces your audience to the state-of-the-art for the problem you're working on.; Explains the limitations in the current methods through ...
Mechanical Behavior of Cyclo-18 on Nickel and Copper Substrates, Reagan Michael Kraft. PDF. Characterizing High Entropy Alloys for Hypersonic Applications, Katherine Pettus. PDF. Mathematical Modeling of a Two Wheeled Robotic Base, Kathryn Remell. PDF. Transient Performance and Melt Front Characterization of Phase Change Materials, Tyler Stamps
theses/dissertations from 2024 pdf. measurement and simulation of aeroacoustic sources generated by elementary muffler components, seth donkin. pdf. droplet analysis of spray inside a compact column gas scrubber through shadowgraphy, brandon heller. pdf
Title: Professor of Mechanical Engineering . 4 ... that can actually be applied to the design process outlined later in this thesis. Product design process as outlined by Ulrich, Eppinger, and Yang [1]: ... Some examples include marketing, industrial design, and mechanical engineering. On the other hand, "in product
The Honours Thesis research projects listed below are available only to McGill Mechanical Engineering Undergraduate students in the Honours program and registered for MECH 403-404 courses. If you are interested in one of the thesis projects, please send an expression of interest to the contact email provided. Although we do our best to keep this list up-to-date, some projects may no longer be ...
Follow. Theses/Dissertations from 2023 PDF. Water Quality Monitoring and Mapping Using Rapidly Deployable Sensor Nodes, Mohamed Abdelwahab. PDF. Rapid Prediction of Phonon Density of States by Graph Neural Network and High-Throughput Screening of Candidate Substrates for Wide Bandgap Electronic Cooling, Mohammed Saif Ali Al-Fahdi. PDF
Theses and dissertations published by graduate students in the Department of Mechanical and Aerospace Engineering, College of Engineering, Old Dominion University since Fall 2016 are available in this collection. ... Thesis: A Model-Based Systems Engineering Approach to e-VTOL Aircraft and Airspace Infrastructure Design for Urban Air Mobility ...
Theses/Dissertations from 2022. PDF. Mechanisms for Improvement of Key Mechanical Properties in Polymer Powder Bed Fusion Processes, Clinton Spencer Abbott. PDF. Reformulated Vortex Particle Method and Meshless Large Eddy Simulation of Multirotor Aircraft, Eduardo J. Alvarez.
This thesis seeks to understand the evolution of research topics over time and identify which subjects have been favored at different points. To accomplish this goal, the titles of MIT Mechanical Engineering theses were analyzed to measure the frequency with which certain keywords appear each year.
This thesis focuses on vibration control of a flexible plate system. The basic modeling of the physical system is developed as a precursor to the controller design. Linear controllers are explored along with advanced controllers. These controllers require an accurate model of the physical system of interest.
The examining committee for MS candidates completing theses should be composed of three (3) members. The committee chair is normally a full-time, tenure-track faculty member. One committee member must be from outside the student's department. Thesis normally counts as 9 credits towards the MS degree requirements.
Authorization to Submit Thesis Sample Authorization to Submit Page This thesis of Andria Wallace, submitted for the degree of Master of Arts with a Major in Interdisciplinary Studies and titled "Industrial Design Engineering in Three Projects," has been reviewed in final form. Permission, as indicated by the signatures and dates below, is
77 Massachusetts Avenue, Room 3-174. Cambridge, Massachusetts 02139. MIT's Department of Mechanical Engineering (MechE) offers a world-class education that combines thorough analysis with hands-on discovery. One of the original six courses offered when MIT was founded, MechE faculty and students conduct research that pushes boundaries and ...
Thesis (Ph. D.)--University of Rochester. Department of Mechanical Engineering, 2023. 2023. 8/31/2025. Elliot Maxwell Snider - Author. Ranga Dias - Thesis Advisor. All-optical nanothermometry of isolated hotspots using NV centers in individual nanodiamonds. Thesis (Ph.D.)--University of Rochester. Department of Mechanical Engineering, 2024.
Mechanical Engineering Thesis Titles and Statements. February 11, 2023 / By Masstopics / 8 minutes of reading. 1: DIGITAL TWIN FOR INTEGRATION OF DESIGN- MANUFACTURING - MAINTENANCE. Digital twin systems provide design-manufacturing-maintenance platforms that are unified and intelligent in that processes can be inferred and risks mitigated.
Theses/Dissertations from 2014. Investigation of the effects of a blade profile geometry in a hinged blade cross axis turbine, Arvin H. Fernando. Design of a fuzzy GS-PID controller for payload drops of varying mass for a quadrotor, Ivan Henderson V. Gue. Energy audit of St. Joseph Hall and Miguel Hall of De La Salle University, Oswald D. Sapang.
Mechanical Engineering Research Projects Gokongwei College of Engineering Mechanical Engineering Internally funded Projects SY2012-2013 to AY2016-2017 Project Title/Number Nature of Project Proponent/Department Physical and Combustion Characterization, Economic & Fuel Cycle Net Energy Analysis & Global Warming Potential
Mechanical Engineering Thesis Examples - Free download as PDF File (.pdf), Text File (.txt) or read online for free. - Writing a mechanical engineering thesis can be an overwhelming process that requires extensive research, analysis, and technical expertise. - HelpWriting.net offers expert assistance tailored for mechanical engineering students, with experienced writers who understand the ...
An open access repository of theses and dissertations from University of Idaho graduate students. The collection includes the complete electronic theses and dissertations submitted since approximately 2014, as well as, select digitized copies of earlier documents dating back to 1910.
The Department of Mechanical Engineering , The Faculty of Eng . Ain Shams University , ( 1971 ) . The Ph.D. Thesis : The thesis title : The Method of Space Harmonics and its use in The Analysis of The Non-linear Control Systems . The Department of Automatic Control of Thermal Processes , Moscow Power Institute , Moscow , USSR , ( 1975 ) .
A thesis is required for the M.S. Mechanical Engineering degree. A non-thesis M.Engr. in Mechanical Engineering is available on the Moscow campus. Depending on your interests, your faculty adviser will help you develop a focused plan of study. This program requires a minimum of 30 credit hours. This program normally takes 1 1/2 to 2 years to ...